Labels Milestones
BackWhich use the 4 pins for trigger, gate, and CV on the footprint. Some options: ## Kassutronics Precision ADSR build notes Change C13 to 10 Alternative: Midi -> CV Alternative: CV from something else use a ground plane. - when pressed, short +12V and Reset In - U1-13 (can get at from top when assembled Stop Switch - 10 ohms between U1-14 and U2-1 when off, more like 1M ohms when off - Single Step - 12V through 10k Ohms to U-1-14, more like 1M when off Glide In - diode to U2-3 Clock In Normal - 1k to U2-8 (AND NOT short to U2-10 - Clock in socket with amplifier to handle weaker (<6v) signals - Clock rate goes down when resistance goes up, opposite to expectation. C1 is too small for film; is film needed? - Smaller cap (476nF?) for C1 - Ceramic 104s for C10, C14, might be fine, might introduce intermittents - Don't put R8 so close to R26 -- D36/R47 too close Testing before powering up: Clock In Normal - 1k to U2-8 (AND NOT short to U2-10 Clock Rate - variable resist +6k between U2-8 and U2-9 - Reset Socket to U3-3 = capacitor measurement roughly 15nF (has a.
- Preview mode performance. // Thanks to http://www.iheartrobotics.com.
- Vertex -4.64695 3.15155 21.6407 facet normal.