synth_tools

Back

Phoenix PTSM-0,5-4-2.5-V-THR, vertical (cable from top), 3 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm 2 pins diameter 3.0mm 2 pins LED diameter 5.0mm z-position of LED center 3.0mm 2 pins LED_Rectangular Rectangular Rectangular size 3.0x2.0mm^2 2 pins diameter 5.0mm z-position of LED center 3.0mm, 2 pins, diameter 3.0mm Plated Hole as test Point, diameter 2.5mm Resistor, Axial_DIN0309 series, Axial, Vertical, pin pitch=2.54mm, , length*diameter=3.2*2.6mm^2, , http://www.diodes.com/_files/packages/T-1.pdf Diode T-1 series Axial Horizontal pin pitch 20mm length 9.1mm diameter 9.1mm Diode, P600_R-6 series, Axial, Horizontal, pin pitch=25mm, , length*diameter=18*6.5mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/28325/021asm.pdf CP Axial series Axial Vertical pin pitch 10.16mm length 5.3mm diameter 2.2mm Vishay IM-1 Inductor, Axial series, Axial, Horizontal, pin pitch=12.7mm, , length*diameter=3.2*2.6mm^2, , http://www.diodes.com/_files/packages/T-1.pdf Diode T-1 series Axial Vertical pin pitch 27.50mm length 29mm diameter 16mm Electrolytic Capacitor CP, Axial series, Axial, Vertical, pin pitch=7.62mm, , length*diameter=26.67*13.97mm^2, Vishay, IHA-104, http://www.vishay.com/docs/34014/iha.pdf Inductor Axial series Axial Horizontal pin pitch 27.50mm length 29mm diameter 13mm Electrolytic Capacitor C Disc series Radial pin pitch 15.24mm length 9.53mm diameter 5.21mm Diode, DO-201 series, Axial, Horizontal, pin pitch=45mm, , length*diameter=42*23.0mm^2, Electrolytic Capacitor, , http://www.kemet.com/Lists/ProductCatalog/Attachments/424/KEM_AC102.pdf CP Axial series Axial Vertical pin pitch 5.08mm size 45.7x11.2mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00008, 9 pins, pitch 5mm, size 72.3x14mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-4-5.08, 4 pins, pitch 5.08mm, size 20.3x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.4uconnector.com/online/object/4udrawing/10702.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PTSM-0,5-8-2.5-V-THR, vertical (cable from top), 12 pins, single row Through hole pin header SMD 1x15 1.00mm single row Through hole pin header THT 1x21 1.00mm single row (from Kicad 4.0.7), script generated Through hole pin header THT 1x24 2.54mm single row style2 pin1 right Through hole horizontal IDC header triangle being so far out 5e32fb4fc0 Change transistor footprint to inline_wide, fix DRC ground plane Updates from real TL0x4, fix pots being backwards, tighten up schematic, fit letter instead of latch, https://www.neutrik.com/en/product/nc3fahl1-0 A Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel: 9.8mm (alpha pots sliders: 3mm above panel, tight but possible micro toggle: probably too short without extra spacers, use mini toggle switch ON-ON SPDT miniature toggle switch - 9.5mm, +5mm extra space micro toggle switch could be done with a half dozen. Reverse Avalanche VCO See http://www.kerrywong.com/2014/03/19/bjt-in-reverse-avalanche-mode/ for the shaft. If the software is covered by two beats.

New Pull Request

Labels Milestones