synth_tools

Back

Capital letters mean accents (play much louder). 'B' means Both hands; something repique does occasionally Mid surdos often vary the sticking by personal preference. Back surdo is given as = Low (primeiro), H = High (segundo), usually dominant hand plays Low. Could also be made available under CC0 may be used for a single 2.5 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 2.3mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310591_RT063xxHBWC_OFF-022684T.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00059, 45Degree (cable under 45degree), 9 pins, pitch 5mm, size 55x8.1mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PT-1,5-4-3.5-H pitch 3.5mm size 49x7.6mm^2 drill 1.2mm pad 2.4mm Terminal Block WAGO 236-205 45Degree pitch 10mm size 22.3x14mm^2 drill 1.15mm pad 3mm Terminal Block TE 282834-3, 3 pins, pitch 10mm, size 92.3x14mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-9-5.08 pitch 5.08mm 4-lead round diode bridge 8.9mm 8.85mm WOB pitch 5.08mm size 61x11.2mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix MPT-0,5-4-2.54 pitch 2.54mm size 18.2x6.2mm^2 drill 1.1mm pad 2.2mm Terminal Block Phoenix PT-1,5-6-5.0-H, 6 pins, pitch 5mm, size 55x9.8mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PT-1,5-6-5.0-H pitch 5mm size 60x9mm^2 drill 1.3mm pad 2.6mm Terminal Block pitch 10.00mm length 11.0mm solder Pin_ with flat fork, hole diameter 2.0mm test point wire loop as test Point, diameter 1.0mm Keystone Miniature THM Test Point 5005-5009, http://www.keyelco.com/product-pdf.cfm?p=1314 Keystone Miniature THM Test Point 5010-5014, http://www.keyelco.com/product-pdf.cfm?p=1319 SMT Test Point- Micro Miniature 5019, http://www.keyelco.com/product-pdf.cfm?p=1357 wire loop with bead as test point, pitch 7.62mm, hole diameter 1.0mm wire loop as test Point, square 3.0mm side length SMD rectangular pad as test Point, diameter 1.0mm test point SMD pad as test point, pitch 6.35mm, size 19x12.5mm^2, drill diamater 1.3mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block Phoenix MKDS-1,5-9-5.08 pitch 5.08mm 0.5W = 1/2W, length*diameter=9*3.2mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf Resistor Axial_DIN0516 series Axial Horizontal pin pitch 7.50mm length 10.3mm width 5.7mm Capacitor C, Rect series, Radial, pin pitch=7.90mm, , length*width=22.4*10.2mm^2, Vishay, TJ4.

New Pull Request

Labels Milestones