Labels Milestones
Back205-00297, 12 pins, pitch 10mm, size 45.8x8.2mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-448, 45Degree (cable under 45degree), 5 pins, pitch 5mm, size 75x9mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-436 45Degree pitch 7.5mm size 66.5x15mm^2 drill 1.2mm pad 2.4mm Terminal Block WAGO 236-106, 45Degree (cable under 45degree), 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-169XCGDK(Ver.9B).pdf LED_Rectangular Rectangular Rectangular size 5.0x2.0mm^2 z-position of LED center 1.6mm 2 pins diameter 5.0mm z-position of LED center 3.0mm, 2 pins LED diameter 5.0mm THT rectangular pad as test point, loop diameter2.6mm, hole diameter 0.7mm, length 6.5mm, width 1.8mm solder Pin_ with flat with fork, hole diameter 0.7mm THT pad as test Point, diameter 3.0mm Plated Hole as test Point, square 2.5mm side length, hole diameter 1.2mm, length 11.3mm, width 3.0mm solder Pin_ diameter 1.0mm, wire diameter 0.8mm Test point with 2 copper strip, labeled with numbers SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, bridged with 1 copper strip, labeled with numbers LUMILEDS LUXEON TX L1T2 LED LED 1W 3W 5W LED SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size from: http://datasheets.avx.com/F72-F75.pdf), generated with.
- 2.77x2.54mm pin-PCB-offset 9.4mm 25-pin D-Sub connector, straight/vertical, THT-mount.
- With traces, vias, and.