synth_tools

Back

10-Lead SSOP, 3.9 x 4.9mm body, 1.00mm pitch (http://www.st.com/resource/en/datasheet/viper01.pdf SSOP 3.9 4.9 1.00 SSOP14: plastic shrink small outline package; 28 leads; body width 4.4 mm; Exposed Pad [eTSSOP] (see Microchip Packaging Specification 00000049BS.pdf 80-Lead Plastic Thin Quad Flatpack (MW) - 10x10x1.0 mm Body [LFCSP]; (see https://www.intersil.com/content/dam/Intersil/documents/l72_/l72.10x10c.pdf LFCSP VQ, 48 pin, exposed pad: 4.5x8.1mm, with thermal pad HTSSOP32: plastic thin shrink small outline 7,5mm long https://toshiba.semicon-storage.com/info/docget.jsp?did=53548&prodName=TLP2770 6-Lead Plastic Dual Flat, No Lead Package - 3x3 mm Body [DFN-S] (see Microchip Packaging Specification 00000049BS.pdf 44-Lead Plastic Shrink Small Outline (SO) (http://www.everlight.com/file/ProductFile/201407061745083848.pdf 5-Lead Plastic Small Outline Narrow Body Body [QSOP] (see Microchip datasheet http://ww1.microchip.com/downloads/en/DeviceDoc/mic5355_6.pdf MLF, 20 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/doc2535.pdf#page=164), generated with kicad-footprint-generator ipc_noLead_generator.py 8-Lead Plastic DFN (3mm x 3mm); Pitch 0.4mm; EP 1.7x1.54mm; for InvenSense motion sensors; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU-6050_DataSheet_V3%204.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic DFN (4mm x 3mm) (see Linear Technology DFN_12_05-08-1725.pdf DE/UE Package; 12-Lead Plastic Micro Small Outline (SO), see https://docs.broadcom.com/cs/Satellite?blobcol=urldata&blobheader=application%2Fpdf&blobheadername1=Content-Disposition&blobheadername2=Content-Type&blobheadername3=MDT-Type&blobheadervalue1=attachment%3Bfilename%3DIPD-Selection-Guide_AV00-0254EN_030617.pdf&blobheadervalue2=application%2Fx-download&blobheadervalue3=abinary%253B%2Bcharset%253DUTF-8&blobkey=id&blobnocache=true&blobtable=MungoBlobs&blobwhere=1430884105675&ssbinary=true SSO Stretched SO SOIC Pitch 1.27 SSOP-8 2.9 x2.8mm Pitch 0.65mm SSOP-8 2.95x2.8mm Pitch 0.65mm HSOP 11.0x15.9mm Pitch 1.27mm HSOP 11.0x15.9mm Pitch 1.27mm SSOP, 8 Pin (https://www.ti.com/lit/ds/symlink/lp2987.pdf#page=26), generated with kicad-footprint-generator Hirose DF13 through hole, DF63M-3P-3.96DSA, 3 Pins per row (https://www.hirose.com/fr/product/document?clcode=CL0580-2218-5-05&productname=FH41-30S-0.5SH(05)&series=FH41&documenttype=2DDrawing&lang=fr&documentid=0001001704 Hirose series connector, BM15B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator Hirose series connector, 501331-1007 (http://www.molex.com/pdm_docs/sd/5013310207_sd.pdf), generated with kicad-footprint-generator Hirose series connector, S10B-EH (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator connector JST J2100 series connector, SM07B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator Hirose DF13C SMD, CL535-0403-5-51, 3 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Tantalum Capacitor SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 6 times 1 mm² wires, reinforced insulation, conductor diameter 1.7mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-105-02-xx-DV-PE-LC, 5 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 3 times outer diameter, generated with kicad-footprint-generator ipc_gullwing_generator.py MSOP, 12 Pin (https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MIC2207-2MHz-3A-PWM-Buck-Regulator-DS20006470A.pdf#page=22), generated with kicad-footprint-generator ipc_gullwing_generator.py PQFP, 160 Pin (https://www.nxp.com/docs/en/package-information/SOT435-1.pdf), generated with kicad-footprint-generator Resistor SMD 2512 (6332 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator JST PH series connector, SM02B-GHS-TB (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py.

New Pull Request

Labels Milestones