synth_tools

Back

CDMC6D28 Inductor, Sumida, 8.1mm × 7.3mm × 5.5 mm, Unshielded, http://products.sumida.com/products/pdf/CR75.pdf Inductor SMD 1206 (3216 Metric), reverse mount, square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator JST GH series connector, S06B-J21DK-GGXR (http://www.jst-mfg.com/product/pdf/eng/eJFA-J2000.pdf), generated with kicad-footprint-generator connector TE MATE-N-LOK side entry Molex Picoflex Ribbon-Cable Connectors, 90814-0008, 8 Pins per row, Mounting: (http://www.molex.com/pdm_docs/sd/039281043_sd.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-104-02-xxx-DV-BE-A, 4 Pins per row, Mounting: PCB Mounting Flange (http://www.molex.com/pdm_docs/sd/039291047_sd.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py TSSOP, 28 Pin (http://www.onsemi.com/pub/Collateral/601AE.PDF), generated with kicad-footprint-generator connector wire 0.15sqmm strain-relief Soldered wire connection, for 4 times 0.15 mm² wires, reinforced insulation, conductor diameter 0.4mm, outer diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type101_RT01605HBWC, 5 pins, pitch 10mm, size 115x8.1mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 804-306, 45Degree (cable under 45degree), 7 pins, pitch 7.5mm, size 32.3x14mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PTSM-0,5-8-2.5-H-THR pitch 2.5mm size 9.7x10mm^2 drill 1.2mm.

New Pull Request

Labels Milestones