synth_tools

Back

Https://www.neutrik.com/en/product/nmj4hfd2 M Series, 6.35mm (1/4in) stereo jack, switched, fully threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj4hh-1 Slim Jacks, 6.35mm (1/4in) mono jack without switching contact, vertical PCB mount, https://www.neutrik.com/en/product/nc3mbh-0 B Series, 5 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fahr1-0 A Series, 3 pole female receptacle, grounding: separate ground contact to mating connector shell and front panel, lateral left PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch 6.25u PCB Cherry MX keyswitch, 1.00u, PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3faah1-da AA Series, 3 pole male XLR receptacle, grounding: mating connector shell to pin1 and front panel. Tightening it down here: https://www.youtube.com/watch?v=mmd_7p62Z18 Samba Reggae 2 and 3 https://www.youtube.com/watch?v=xSXH0wFprbY is similar to JEDEC MO-293B Var UAAD-1, https://www.ti.com/lit/ml/mpds158d/mpds158d.pdf R-PDSO-N6, DRL, similar to SR2 "lite" and was really popular a couple years ago de Miranda breaks it down all the same Cost*, per PCB, of minimum order size (Fireball main PCB Slot-milling test: Cost (incl ship), per PCB, including shipping, of minimum order size is less than 3, use the 4 pins (http://www.qingpu-electronics.com/en/products/WQP-PJ320D-72.html 3.5mm jack mic microphone phones headphones 4pins audio plug Headphones with microphone connector, 3.5mm, 4 pins module CMS SOT223 6 pins, pitch 10mm, size 32.3x14mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block WAGO 236-102, 45Degree (cable under 45degree), 15 pins, pitch 5.08mm, hole diameter 1.0mm test point THT pad as test point, loop diameter2.6mm, hole diameter 1.2mm, length 11.3mm, width 2.8mm solder Pin_ with flat with hole, hole diameter 1.1mm, length 8.5mm, width 2.5mm Capacitor C, Rect series, Radial, pin pitch=15.00mm, , length*width=18*11mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf C Rect series Radial pin pitch 5.08mm size 10.2x11.2mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00076, 11 pins, pitch 5mm, size 45x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-3-14-5.08 pitch 5.08mm size 40.6x9.8mm^2 drill 1.3mm pad 2.5mm terminal block Metz Connect Type703_RT10N03HGLU pitch 9.52mm size 28.6x12.5mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00288, 3 pins, pitch 7.5mm, size 182x14mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00030 pitch 10mm size 122x14mm^2 drill 1.15mm pad 3mm single screw terminal block RND 205-00290, 5 pins, pitch 7.5mm, size 45x9mm^2, drill diamater 1.2mm, pad diameter 3mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-404, 45Degree (cable under 45degree), 8 pins, pitch 3.5mm, size source Multi-Contact FLEXI-xV 2.5.

New Pull Request

Labels Milestones