Labels Milestones
BackWires: - glide in (sleeve and normal both GND) 6x Sockets, 2pin: - reset in - glide in (j16/j17 // cv range (sw12 // 1 for once/cont (sw15 // pause cv in (j18/j19 // 1 rotary switch - 9.5mm, +5mm extra space available mini toggle switch ON-ON | | | R17, R19 | 3 | 22k | Resistor | | Tayda | A-3588 | | | | Tayda | A-1121 | | | Tayda | A-1605 | | R16, R18, R26 | 3 | A1M | Potentiometer | | | | Tayda | A-553 | | R31 | 1 | Conn_01x02 | SIP socket, 2.54 mm, 1x10 | | | J10 | 1 C10, C14 too small for a single 0.5 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 3.5mm, size 7.7x7mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type094_RT03502HBLU pitch 5mm size 10x12.5mm^2 drill 1.4mm pad 2.7mm terminal block Metz Connect Type059_RT06303HBWC pitch 3.5mm size 52.5x7.6mm^2 drill 1.2mm pad 2.4mm Terminal Block WAGO 804-316, 45Degree (cable under 45degree), 6 pins, pitch 5mm, size 50x9mm^2, drill diamater 1.2mm, pad diameter 2.5mm, hole diameter 1.3mm, wire diameter 1.0mm wire loop as test point, loop diameter2.548mm, hole diameter 1.3mm, wire diameter 1.0mm THT rectangular pad as test Point, square 1.0mm side length, hole diameter 0.7mm, wire diameter 1.0mm wire loop as test point, loop diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-224 45Degree pitch 10mm Varistor, diameter 15.5mm, width 5.4mm, pitch 7.5mm size 9.8x14mm^2 drill 1.15mm pad 3mm Terminal Block 4Ucon ItemNo. 19964 pitch 3.5mm size 42x7.6mm^2 drill 1.2mm pad 2.4mm Terminal Block WAGO 236-103 45Degree pitch 10mm size 32.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 804-301, 45Degree (cable under 45degree), 14 pins, pitch 6.35mm, size 12.7x12.5mm^2, drill diamater 1.3mm, pad diameter 2.1mm, size source Multi-Contact FLEXI-2V 0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator.
- Http://www.phoenixcontact.com/us/products/1814702/pdf PhoenixContact PTSM0.5 2.
- 21mm apart, meaning that knobs shouldn't be so.
- Normal 6.703010e-01 2.207629e-03 -7.420860e-01 facet.
- Appropriate stand-off hardware for connecting front.
- From b284a71188b23f9f8c43bee1fcce2820249f4384 Mon Sep 17 00:00:00 2001 Subject.