Labels Milestones
Back- 1k to U2-8 (AND NOT short to U2-10 Clock Rate - variable resist +6k between U2-8 and U2-9 Reset Sw - when pressed, short +12V and Reset In - U1-13 (can get at from top when assembled Stop Switch - 10 ohms between U1-14 and U2-1 when off, more like 1M when off - Single Step - 12V through 10k Ohms to U-1-14, more like 1M ohms when off Single Step - 12V through 10k Ohms to U-1-14, more like 1M ohms when off - Single Step - 12V through 10k Ohms to U-1-14, more like 1M when off - Glide attenuator (B10k) (join two left pins from below Pots, 2-pin: Glide, manual (A100k) (two left pins, from below) - Clock Rate - variable resist +6k between U2-8 and U2-9 Reset Sw - when two traces cross on opposite sides of the square used as a full bridge rectifier; could use larger spacing - C7 is a ceramic 104 power cap like C5, C6, C8, C9, C11, C12; space accordingly Move any UX connections on the front Don't put R8 so close to R26 - D36/R47 too close - Clock rate (B100k) (not sure yet which 2 pins LED diameter 5.0mm z-position of LED center 2.0mm 2 pins diameter 5.0mm z-position of LED center 3.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 2.0mm, 2 pins LED, diameter 5.0mm, 4 pins, pitch 5mm, size 25x10.5mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal.
- (2520 Metric), square (rectangular) end terminal, IPC_7351.
- Hole Mount Test Points Keystone Miniature THM Test.
- Size 70x9.8mm^2, drill diamater 1.1mm.
- Assumes sole responsibility to secure any other.