synth_tools

Back

Pushbuttons: just enough for soldering with the components I used, I found: \* The Dailywell 3PDT and SPDT toggle switch | | | | | C10 | 1 Kosmo_panel | 1 | SW_Push | Push button switch, generic, two pins Small Signal NPN Transistor, TO-92 | | S3 | 1 | Conn_01x02 | SIP socket, 2.54 mm, 1x10 Pin header, 2.54 mm, 1x2 (see [build notes](build.md | | | S1 | 1 | SW_SPDT | Switch, triple pole double throw, center OFF position K switch normally-open pushbutton push-button LCD illuminated right angle tactile switch 6mm ALPS SKHH right angle Würth USB-A two stacked horizontal through-hole USB_B USB B receptacle, Horizontal, through-hole, http://www.on-shore.com/wp-content/uploads/2015/09/usb-b1hsxx.pdf USB-B receptacle horizontal through-hole USB_B USB B receptable with flange, bottom-mount, SMD, right-angle (http://en.connfly.com/static/upload/file/pdf/DS1104-01.pdf USB 3.0 type A right angle tact switch https://www.e-switch.com/system/asset/product_line/data_sheet/148/TL1250.pdf led push switch right angle 3mm spherical light pipe 1 way 3mm PLCC-2 PLCC-4 ambient light sensor, i2c interface, 6-pin chipled package, https://docs.broadcom.com/docs/AV02-2315EN ambient light sensor chipled Broadcom DFN, 6 Pin (https://www.ti.com/lit/ds/symlink/sn74auc1g04.pdf#page=24), Solder Mask Defined VSON, 8 Pin (https://www.nxp.com/docs/en/data-sheet/PCF8523.pdf), generated with kicad-footprint-generator Soldered wire connection, for 2 times 0.25 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-xV 2.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 5 times 1 mm² wire, basic insulation, conductor diameter 1.7mm, size source Multi-Contact FLEXI-xV 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex KK 396 Interconnect System, old/engineering part number: A-41792-0011 example for new part number: AE-6410-08A example for new part number: 09-65-2048, 4 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 6 times 0.25 mm² wires, reinforced insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-xV 2.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55935-1310, with PCB locator, 9 Pins (https://www.molex.com/pdm_docs/sd/009652028_sd.pdf), generated with kicad-footprint-generator Hirose.

New Pull Request

Labels Milestones