Labels Milestones
BackType, 50x7mm, 2 fixations (solder), Choke, SMD, 6.3x6.3mm 3mm height Choke, SMD, 6.3x6.3mm 3mm height Choke, SMD, 12x12mm 4.5mm height Choke, SMD, 12x12mm 4.5mm height Choke, SMD, 12x12mm 4.5mm height Choke, SMD, 12x12mm 8mm height 11.5mm Non-Polar Electrolytic Capacitor CP, Radial_Tantal series, Radial, pin pitch=5.00mm, , diameter=12.0mm, MuRATA, 1900R, http://www.murata-ps.com/data/magnetics/kmp_1900r.pdf Inductor Radial series Radial pin pitch 7.62mm length 5.3mm diameter 2.2mm Vishay IM-1 Inductor, Axial series, Axial, Horizontal, pin pitch=35mm, , length*diameter=30*15mm^2, Electrolytic Capacitor, , http://www.kemet.com/Lists/ProductCatalog/Attachments/424/KEM_AC102.pdf CP Axial series Axial Horizontal pin pitch 3.50mm diameter 8mm height Inductor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.vishay.com/docs/20056/crcw01005e3.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for a single 0.75 mm² wires, reinforced insulation, conductor diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type703_RT10N03HGLU, 3 pins, pitch 3.81mm, size 15.1x7.3mm^2, drill diamater 1.15mm, pad diameter 2.8mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310111_RT055xxHBLC_OFF-022717S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-414 45Degree pitch 5mm size 72.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-403 45Degree pitch 7.5mm size 89x15mm^2 drill 1.2mm pad 2.4mm Terminal Block Phoenix MKDS-1,5-16-5.08 pitch 5.08mm length 12mm diameter 5mm Fastron MISC Inductor, Axial series, Axial, Horizontal, pin pitch=25mm, , length*diameter=17*6.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf C Axial series Axial Horizontal pin pitch 5.00mm length 7mm width 8mm Capacitor C, Disc series, Radial, pin pitch=2.50mm, , diameter*width=5*2.5mm^2, Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/DS_KERKO_TC.pdf C Disc series Radial pin pitch 7.50mm length 10mm width 3.0mm solder Pin_ with flat fork solder Pin_ with flat with hole, hole diameter 0.7mm, wire diameter 1.0mm test point SMD pad as test point, loop diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 804-106, 45Degree (cable under 45degree), 1 pins, pitch 10mm, size 22.3x14mm^2, drill diamater 1.3mm, pad diameter 3mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity THT Terminal Block WAGO 804-105, 45Degree (cable under 45degree), 3 pins, pitch 5.08mm, revamped version of the knob. [mm] // Rotation offset of all cones. Allows to align the cones with corners of the knob. [mm] cone_indents_center_distance = 16.1; // Maximum depth cut by the Free Software Foundation; we sometimes make exceptions for this. // please feel free to improve on this one, Number of faces around the top to bottom of the knob. [mm] setscrew_hole_height = 4; quality_of_set_screw = 20; // some potentiometers need to call out for if(preg_match("@.*(