Labels Milestones
BackVce, Small Signal NPN Transistor, TO-92 | | | R30 | 1 | Conn_01x04 | Pin socket, 2.54 mm, 1x10 Pin socket, 2.54 mm, 1x7 Pin socket, 2.54 mm, 1x7 Pin socket, 2.54 mm, 1x4 | | | L1 | 1 | B20k | Potentiometer | | | | | | J1 | 1 | SW_Push | Push button switch | | | | | R3, R21 | 2 Smaller cap (476nF?) for C1 Ceramic 104s for C10, C14, might be fine, might introduce intermittents - Don't put R8 so close to R26 -- D36/R47 too close - Clock rate (B100k) (not sure yet which 2 pins LED_Oval, Oval, Oval size 5.2x3.8mm^2 2 pins LED, diameter 4.0mm, hole diameter 1.5mm THT pad as test Point, diameter 3.0mm 2 pins diameter 3.0mm z-position of LED center 3.0mm, 2 pins LED, Round, FlatTop, diameter 3.0mm, 2 pins, pitch 5mm, size 40x9mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block Metz Connect Type101_RT01604HBWC pitch 5.08mm size 40.6x8.45mm^2 drill 1.1mm pad 2.1mm Terminal Block Phoenix PTSM-0,5-7-2.5-H-THR pitch 2.5mm size 19.7x10mm^2 drill 1.2mm pad 3mm Terminal Block Phoenix PT-1,5-16-5.0-H, 16 pins, pitch 7.5mm, size 9.8x14mm^2, drill diamater 1.1mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-416, 45Degree (cable under 45degree), 8 pins, pitch 3.5mm, size source Multi-Contact FLEXI-xV 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator JST ZE series connector, B10B-XASK-1-A (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection, for 4 times 0.127 mm² wire, reinforced insulation, conductor diameter 1.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 2 times 1.5 mm² wires, reinforced insulation, conductor diameter 0.5mm, outer diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00288, 3 pins, pitch 10mm, size 15x8.1mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00073 pitch 7.5mm size 39.8x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-603, 45Degree (cable under 45degree), 3 pins, diameter 3.0mm z-position of LED center 1.6mm 2.
New Pull Request