Labels Milestones
BackSignals Clock out socket, with option to send CV; could also do all-different colors, but unfortunately Mouser only has A1Ms in orange. * Expensive, about $3 each. *** Replacing LEDs in many places might be fine, might introduce intermittents - Don't put R8 so close to R26 D36/R47 too close - Clock In Normal - 1k to U2-8 (AND NOT short to U2-10 - Clock POT is the decade counter expects CLOCK to pass 1/2 of V+ (i.e. 6v) but many external clock sources cycle between 0v and 5v or even much less. - One potentiometer per step, to set output voltages. (10) One potentiometer for internal clock rate. One SPDT switch per step, to enable/disable gate per step. (10 One SPDT switch to disable the clock, and a 13-roll, which sounds like three 5-rolls before the first number in this period. 1 Unresolved Conversation # Temporary files *.000 *.bak Initial version .gitignore | 1 | AudioJack2_SwitchT | Audio Jack, 2 Poles (Mono / TS) | | R5 | 1 uF | Unpolarized capacitor | | | | | Tayda | A-1605 | | Tayda | A-4349 | | Tayda | A-159 | | | | | | R16, R17, R19, R20 **Potentiometer, 9 mm vertical board mount OR: | | J4 | 1 | 10nF | Ceramic capacitor | | S2 | 1 nF | Unpolarized capacitor | | | Tayda | A-001 | | | D1, D2 | 2 | 1N5817 | Schottky diode | | | Tayda | A-3545, A-3489, or A-3499\*\*\* | | | | J3 | 1 | B10k | \*\*Potentiometer, 16 mm vertical board mount OR: | | Tayda | A-3588 | | | | | | | 1 | 2_pin_Molex_connector | KK254 Molex header 2.54 mm spacing 3 pin Molex connector 2.54 mm 2x5