synth_tools

Back

Diameter=5mm, height=5mm, Non-Polar Electrolytic Capacitor CP, Radial_Tantal series, Radial, pin pitch=7.62mm, 7W, length*width*height=25*9*9mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf Resistor Axial_Power series Box pin pitch 10.00mm length 11.0mm width 4.2mm Capacitor C, Rect series, Radial, pin pitch=7.50mm, , length*width=9*3.9mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 20.32mm 2W length 11.9mm diameter 4.5mm Tantal Electrolytic Capacitor CP, Radial series, Radial, pin pitch=5.00mm, , length*width=7.2*3.5mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_2.pdf C Rect series Radial pin pitch 5.00mm length 7.2mm width 3.0mm solder Pin_ with flat with hole, hole diameter 1.5mm THT rectangular pad as test Point, diameter 2.0mm, hole diameter 0.7mm, wire diameter 0.8mm Test point with 2 copper strip, labeled with numbers SMD Solder 3-pad Jumper, 1x1.5mm rounded Pads, 0.3mm gap, open, labeled with numbers LUMILEDS LUXEON TX L1T2 LED LED 1W 3W 5W LED SMD https://www.kingbrightusa.com/KCpack.asp?txtPack=APHBM2012 Kingbright, dual LED, 3.5 x 2.8 mm Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-7810645, 6 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0834-6-81&productname=DF12E(3.0)-50DP-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000992393), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 5 times 1.5 mm² wires, reinforced insulation, conductor diameter 1.4mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310861_RT034xxHBLC_OFF-026114K.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00087 vertical pitch 2.5mm size 17.2x10mm^2 drill 1.2mm pad 2.3mm terminal block RND 205-00082, 6 pins, pitch 2.54mm, size 20.8x6.2mm^2, drill diamater 1.1mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity THT Terminal Block WAGO 804-301, 45Degree (cable under 45degree), 6 pins, pitch 5mm, size 25x8.1mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-603, 45Degree (cable under 45degree), 12 pins, pitch 5mm, size 30x9.8mm^2, drill diamater 1.15mm, pad diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block Phoenix MKDS-1,5-7-5.08, 7 pins, pitch.

New Pull Request

Labels Milestones