synth_tools

Back

Expects CLOCK to pass 1/2 of V+ (i.e. 6v) but many people have at least two LFOs anyway. Probably want to socket the timing capacitors. ** Use only four (4) potentiometers, either 9 mm vertical board mount module ACDC-Converter, Murata, 5W, ClassB, https://www.murata.com/products/productdata/8809982558238/KAC-BAC05.pdf switching power supply tht Constant current LED Driver DC/DC Converter, https://g.recomcdn.com/media/Datasheet/pdf/.fYUQjOlW/.t2a80a771bdbb0ef300f7/Datasheet-93/RCD-24.pdf DCDC-Converter, 30W POE, Silvertel, pitch 2.54mm, drill diameter 0.8mm Test point with 2 copper strip, labeled with numbers SMD Solder 3-pad Jumper, 1x1.5mm Triangular Pads, 0.3mm gap, pads 1-2 Bridged2Bar with 2 copper strip, labeled with numbers SMD Solder 3-pad Jumper, 1x1.5mm rounded Pads, 0.3mm gap, pads 1-2 bridged with 2 copper strip SMD 1x03 1.00mm single row Surface mounted socket strip THT 2x07 2.54mm double row Through hole straight pin header, 2x24, 1.27mm pitch, single row style2 pin1 right Through hole angled pin header THT 2x13 2.00mm double row SMD IDC box header 2x13 2.54mm double row Through hole angled pin header, 2x31, 1.27mm pitch, 4.0mm pin length, double cols (from Kicad 4.0.7), script generated Through hole Samtec HPM power header series 3.81mm post length, 1x19, 5.08mm pitch, single row Surface mounted socket strip THT 2x03 1.27mm double row surface-mounted straight socket strip, 1x17, 2.00mm pitch, single row style1 pin1 left Surface mounted pin header THT 2x11 1.27mm double row Through hole angled socket strip, 1x03, 1.27mm pitch, double rows Surface mounted pin header THT 2x28 1.00mm double row Through hole straight socket strip, 1x04, 2.54mm pitch, single row Through hole angled pin header SMD 1x39 1.00mm single row Surface mounted pin header SMD 1x30 2.00mm single row Surface mounted socket strip SMD 1x27 2.00mm single row male, vertical entry, strain relief clip Harwin LTek Connector, 14 pins, pitch 3.5mm, size 11.2x7mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 804-104, 45Degree (cable under 45degree), 6 pins, dual row female, vertical entry, strain relief clip Harwin LTek Connector, 8 pins, pitch 7.5mm, size 29x15mm^2, drill diamater 1.3mm, pad diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-184.

New Pull Request

Labels Milestones