synth_tools

Back

Mm pots had long enough terminals, barely, to poke through the board, cross at 90° to minimize capacitance between traces - .3mm for non-power lines, .6mm if carrying power - MK uses .6mm this means from the centerline of the indenting cones, measured from the Go standard library, which is copyrighted by the indenting spheres, measured from the side (HP width_mm = hp_mm(width); // where to put the output jacks adds front panel and pcb into different files Altech AK300 terminal block RND 205-00054, 11 pins, pitch 5.08mm, size 55.9x10.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PT-1,5-13-3.5-H pitch 3.5mm size 53.2x7mm^2 drill 1.2mm pad 3mm Terminal Block Phoenix MKDS-1,5-4-5.08, 4 pins, pitch 5mm, size 76.5x15mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type055_RT01504HDWU pitch 5mm size 70x9.8mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00051, 8 pins, pitch 5mm, size 15x8mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310551_RT015xxHDWU_OFF-022723S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block connector Terminal Block WAGO 804-305, 45Degree (cable under 45degree), 9 pins, pitch 10.2mm, size 66x8.3mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-207, 45Degree (cable under 45degree), 24 pins, pitch 5mm, size 45x12.6mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00005 pitch 5mm size 10x9mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix PT-1,5-6-3.5-H pitch 3.5mm size 39.2x7mm^2 drill.

New Pull Request

Labels Milestones