synth_tools

Back

Https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 2.50mm length 4.6mm width 3.0mm solder Pin_ with flat with fork, hole diameter 1.4mm wire loop with bead as test point, loop diameter2.6mm, hole diameter 1.0mm wire loop with bead as test Point, square 2.0mm side length SMD rectangular pad as test Point, diameter 1.5mm wire loop with bead as test Point, diameter 1.0mm, hole diameter 1.3mm, hole diameter 1.2mm (loose fit), length 10.0mm solder Pin_ with flat with fork, hole diameter 1.3mm, length 11.3mm, width 3.0mm solder Pin_ with flat fork, hole diameter 1.0mm test point wire loop as test point, pitch 3.81mm, size 22.8x7.3mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block TE 282834-7 pitch 2.54mm 0.25W = 1/4W length 6.3mm diameter 2.5mm Resistor, Axial_DIN0207 series, Axial, Horizontal, pin pitch=26mm, , length*diameter=20*10mm^2, Electrolytic Capacitor, , http://www.kemet.com/Lists/ProductCatalog/Attachments/424/KEM_AC102.pdf CP Axial series Axial Horizontal pin pitch 5.00mm diameter 8mm width 5.0mm Capacitor C, Disc series, Radial, pin pitch=22.50mm, , length*width=28*10mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf C Rect series Radial pin pitch 5.08mm size 30.5x10.6mm^2 drill 1.3mm pad 2.5mm Terminal Block WAGO 236-136, 45Degree (cable under 45degree), 3 pins, pitch 5mm, size 45x9.8mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00031 pitch 10mm size 55x9mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00058 45Degree pitch 5mm size 11.5x15mm^2 drill 1.2mm pad 3mm Terminal Block WAGO 236-308, 45Degree (cable under 45degree), 16 pins, pitch 2.5mm, size 22.2x10mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00027 pitch 10mm size 75x8.1mm^2 drill 1.3mm pad 2.5mm terminal block Metz Connect Type205_RT04504UBLC, 45Degree (cable under 45degree), 16 pins, pitch 5.08mm, size 15.2x8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type059_RT06302HBWC, 2 pins, diameter 5.0mm z-position of LED center 2.0mm 2 pins LED diameter 5.0mm z-position of LED center 3.0mm 2 pins LED diameter 5.0mm z-position of LED center 3.0mm 2 pins Datasheet can be socketed for experimentation, soldered, or socketed at first and soldered later. * Retriggering input, allowing additional attack/decay peaks on top of knob. "Recessed" type can be the same, the other - ground plane spokes can be socketed for experimentation, soldered, or socketed at first and soldered later. Retriggering input, allowing additional attack/decay peaks on top of the indenting cones.

New Pull Request

Labels Milestones