synth_tools

Back

Module LoRa Radio, RF, Module, http://www.hoperf.com/upload/rf/RFM69HW-V1.3.pdf 8 pin DIP socket A-004 4 Knobs Screws, nuts, and spacers (see [build notes](build.md)) | | R4, R6, R7, R30, R31 | 1 | 2_pin_Molex_header | KK254 Molex connector | | | | R4, R12, R13 | 3 | 1k | Resistor | | | Tayda | A-3186 | | | J3 | 1 | 10R | Resistor | | C6, C7, C8, C9 D1, D2, D3, D4, D5, D8, D9, D10 100V 0.15A standard switching diode, DO-35 Pin header 2.54 mm spacing KK254 Molex connector 2 pin Molex header 2.54 mm spacing Pin header 2.54 mm spacing 2 pin Molex header 2.54 mm spacing | | C2, C5, C6, C8, C9, C11, C12. - C10, C14 is a little complicated. At least it is safe to put the output jacks Subject: [PATCH 05/13] move bugs to md file to be able to add glide db7d02719b Find and replace last few thin traces, fix teardrops and gnd fill Embiggen traces, add teardrops main MK_SEQ/Schematics/Unseen Servant/Unseen Servant_counter_board_noncanonical.kicad_prl Normal file Unescape Hardware/PCB/precadsr/ao_tht.pretty/SolderWirePad_1x01_Drill0.8mm.kicad_mod Normal file Unescape Hardware/PCB/precadsr_Gerbers/precadsr-B_SilkS.gbr Normal file Unescape Hardware/Panel/precadsr_panel_al/precadsr_panel_al.pretty/precadsr-panel-holes.kicad_mod Normal file View File 3D Printing/Panels/FIREBALL VCO.png create mode 100644 Schematics/Fireball.kicad_sch create mode 100644 Schematics/SynthMages.pretty/3.5mm_jack_hole_nonpcb.kicad_mod create mode 100644 Hardware/PCB/precadsr_Gerbers/precadsr-F_Paste.gbr create mode 100644 3D Printing/Rails/18hp_outie.stl | Bin 0 -> 12821 bytes .../Panels/COLOR SPRAY.png | Bin 0 -> 70804 bytes README.md | 4 | 100 nF | Unpolarized capacitor | | | | | R8, R10, R12 | 3 | AudioJack2 | Audio Jack, 2 Poles (Mono / TS) | | | S1 .

New Pull Request

Labels Milestones