synth_tools

Back

Fuseholder 5x20 closed horizontal Bulgin FX0457 Sicherungshalter PCB fuse holders for 5 mm LED 5 mm LED 5 mm | | J12 | 1 | Synth_power_2x5 | 2x5 pin shrouded header 2.54 mm spacing | | R30 | 1 | SW_Push | Push button switch, generic, two pins K switch dual-pole double-throw DPDT spdt ON-ON D Screw terminal, single row, 01x03 D 2x5 pin shrouded header 2.54 mm spacing D 3 rotary switches are actually 2p6t, which means only six different step counts are available until the replacement arrives - Wiring SW15 (once/stop) and cascade out is easier done via skywiring; only one side to a trace on one side to center of package, Thorlabs photodiodes TO-46-3, Pin2 at center of package, Thorlabs photodiodes, https://www.thorlabs.de/drawings/374b6862eb3b5a04-9360B5F6-5056-2306-D912111C06C3F830/FDGA05-SpecSheet.pdf TO-92 leads molded, wide, drill 0.75mm (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot266-1_po.pdf SSOP, 20 Pin (http://www.ti.com/lit/ds/symlink/drv8662.pdf#page=23), generated with kicad-footprint-generator Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-140 , 10 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator Molex CLIK-Mate series connector, S32B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py TSSOP, 16 Pin (http://www.analog.com/media/en/technical-documentation/data-sheets/LTC7810.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py LGA, 14 Pin (http://www.st.com/resource/en/datasheet/lis2dh.pdf), generated with kicad-footprint-generator Molex PicoBlade series connector, S32B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator Resistor SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator LED SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py WQFN-20 4.5mm 2.5mm 0.5mm WQFN, 20 Pin (http://www.ti.com/lit/ds/symlink/drv8662.pdf#page=23), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 2 times 2.5 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_312051_RT045xxUBLC_OFF-022759T.pdf, script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT single screw terminal block RND 205-00016 pitch 5mm size 40x7.6mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00082 pitch 10mm size 65x9mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00289, 4 pins, pitch 5.08mm, size 10.2x8mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00004, 5 pins, pitch 7.5mm, size 69.8x14mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block WAGO 236-504 45Degree pitch 7.5mm size 74x15mm^2 drill 1.2mm pad 3mm Terminal Block WAGO 236-109, 45Degree (cable under 45degree), 5 pins, pitch 10.2mm, size 35.6x8.3mm^2, drill diamater 1.15mm, pad diameter 2.6mm, see http://www.4uconnector.com/online/object/4udrawing/10700.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PT-1,5-15-5.0-H pitch 5mm.

New Pull Request

Labels Milestones