Labels Milestones
Back-x axis. By rotating +90°, // we move that face to be more understandable. Default scale should be the same, see datasheet: https://www.mouser.com/datasheet/2/54/PTL-777483.pdf (page 4) if we want them to match. We could also do all-different colors, but unfortunately Mouser only has A1Ms in orange. Expensive, about $3 in parts (no ICs), and a switch to disable clock (pause). - SPST switch to disable reset (run once). Momentary-normal-off pushbutton to manually step. SPST switch to adjust CV output range, switch between 5v and 2.5v max. One per step, to indicate current step. (10 Momentary-normal-off pushbutton to manually step. SPST switch per step, to enable/disable gate per step. (10 - One idea: add a voltage to trigger steps. Replace C10 with 100K resistor, and bridge out R44 with a wire. Assembly Notes: More notes Schematics/schematic_bugs_v1.txt | 2 | 1N5817 | Schottky diode | | | | 1 | 1uF | Film capacitor | | C10 | 1 | Conn_01x10 | Pin socket, 2.54 mm, 1x4 | | | R14, R15, R18 | 3 | 2N3904 | Small Signal NPN Transistor, TO-92"/>