Labels Milestones
BackBefore removing redundant LED resistors Checkpoint after re-centering sliders, before removing redundant LED resistors next to transistors to save on panel wires More traces and vias, and this is actually a pushbutton momentary, but roughly same dimensions as toggle switch ON-ON Push button switch, generic, two pins | | J2 | 1 | 1uF | Film capacitor | | | | | | C3, C4, C11 | 3 | A1M | Potentiometer | | J9 | 1 | B10k | **Potentiometer, 16 mm vertical board mount. Only 16 mm vertical board mount OR: | | | Taydaa | A-4755 | | | R31 | 1 | 2_pin_Molex_header | KK254 Molex connector 2.54 mm spacing | | R15, R20, R22 | 2 .../Unseen Servant/Unseen Servant.kicad_sch | 1120 From 1ed9d69b418eb6a9322b9893aea438f59933f7f4 Mon Sep 17 00:00:00 2001 Subject: [PATCH] rm al panel Hardware/Panel/precadsr_panel_al/fp-lib-table | 4 | 47k | Resistor | | | | | C2, C5, C6, C8, C9, C11, C12; space accordingly C3 and C4 could use larger spacing - C7 is a combination of speakON socket and 6.35mm (1/4in) switching stereo jack, switched, with chrome ferrule and straight PCB pins, https://www.neutrik.com/en/product/nmj6hfd4 M Series, 6.35mm (1/4in) stereo jack, switched, half threaded nose and offset PCB pins, https://www.neutrik.com/en/product/nmj6hfd4 M Series, 6.35mm (1/4in) mono jack, switched, half threaded nose, https://www.neutrik.com/en/product/nsj12hf-1 Stacking Jacks, Stereo dual jack, full threaded nose and offset PCB pins, https://www.neutrik.com/en/product/nmj6hhd2 Slim Jacks, 6.35mm (1/4in) stereo jack, metal nose, efficient chassis ground connection, T+R+S normalling contact, https://www.neutrik.com/en/product/nrj6hm-1 Stacking Jacks, Mono dual jack, full nose, https://www.neutrik.com/en/product/nsj12hc Stacking Jacks, Mono dual jack, half threaded nose, https://www.neutrik.com/en/product/nrj4hh Slim Jacks, 6.35mm (1/4in) mono jack (T/S), https://www.neutrik.com/en/product/nj2fd-v 6.35mm (1/4 in) Vertical Jack, 2 x 6mm drills 3 pin Molex connector 2.54 mm spacing | | | | Tayda | A-3545, A-3489, or A-3499\*\*\* | | C10 | 1 | Conn_01x02 | SIP socket, 2.54 mm, 1x2 (see build notes) 1 SIP socket, 2.54 mm, 1x4 Pin header, 2.54 mm, 1x2 (see [build notes](build.md)) | | | | S1 | 1 | TL074 | Quad Low-Noise JFET-Input Operational Amplifiers, DIP-8/SOIC-8/TSSOP-8/VSSOP-8