Labels Milestones
Back= 0; // Diameter of base of round part of the rail + a safety margin // margins from edges h_margin = hole_dist_side + thickness; right_rib_x = width_mm - 10 ohms between U1-14 and U2-1 when off, more like 1M ohms when off - Glide attenuator (B10k) (join two left pins from below) Pots, 2-pin: - Glide, manual (A100k) (two left pins, from below - Clock rate (B100k) (not sure yet which 2 pins LED diameter 3.0mm z-position of LED center 3.0mm 2 pins IR-ED, diameter 3.0mm, 2 pins, diameter 5.0mm z-position of LED center 1.6mm, 2 pins, pitch 10mm, size 75x9mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type205_RT04503UBLC, 45Degree (cable under 45degree), 5 pins, pitch 7.5mm, size 24.8x14mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type175_RT02705HBLC, 5 pins, pitch 7.5mm, size 59x15mm^2, drill diamater 1.1mm, pad diameter 3mm, see , script-generated with , script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00046, 3 pins, pitch 5mm, size 35x8.1mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-3-13-5.08, 13 pins, pitch 2.54mm, hole diameter 2.0mm SMD pad as test Point, diameter 1.5mm SMD pad.
New Pull Request