synth_tools

Back

Step LED + 23mm hole_left = slider_center - 13; hole_bottom = hole_top - 90; hole_right = hole_left + 78.5; footprint "eurorack_rail_hole" (version 20221018) (generator pcbnew 9f9f6acf76 Add notes about wiring SW15 cross-board Add notes about UX component wiring 2x Sockets, all three pins need wires: - clk in - glide in (sleeve and normal both GND - Gate out (could normal to Reset In socket - Reset Socket to U3-3 = capacitor measurement roughly 15nF (has a resistor as well Once/Cont When in Cont mode shorts Casc Out normal to TP10, optional 2x Toggle Switches, 2pin: all step switches (all go to same bus 2x Pushbutton switches, all 2pin: reset Pots, 3-pin: - Glide In - diode to U2-3 Glide In - ~27K to U3-8? No, transistors maybe activate? - Clock rate (B100k) (not sure yet which 2 pins diameter 5.0mm z-position of LED center 1.0mm 2 pins diameter 3.0mm SMD pad as test Point, square 4.0mm side length SMD rectangular pad as test point, pitch 2.0mm, hole diameter 1.3mm, wire diameter 1.0mm wire loop as test point, loop diameter 3.5mm, size 15x8.3mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block Phoenix PT-1,5-16-5.0-H, 16 pins, pitch 7.5mm, size 9.8x14mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00088 vertical pitch 5mm Varistor, diameter 21.5mm, width 7.5mm, pitch 10mm size 162x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 804-108, 45Degree (cable under 45degree), 1 pins, pitch 10mm, size 115x10.3mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310731_RT026xxHBLU_OFF-022792U.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00308, 12 pins, pitch 7.5mm, size 21.5x15mm^2, drill diamater 1.1mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity THT Terminal Block WAGO 236-108 45Degree pitch 5mm size 47.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 804-304, 45Degree (cable under 45degree), 6 pins, pitch 7.5mm, size 37.5x9mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00071, 6 pins, pitch 5mm, size 47.3x14mm^2, drill diamater 1.15mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Philmore , 3 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13C-10P-1.25V%2851%29/), generated with kicad-footprint-generator ipc_noLead_generator.py Quectel BG96.

New Pull Request

Labels Milestones