Labels Milestones
BackA pulldown resistor after D35. Connect a 100k resistor between coarse and +12V, value unknown Align panel to PSU PCB (will affect choice of sitching hardware). Consider aesthetics and prcticality of stand-offs from front panel. Opportunities abound for aesthetic choices. Determine appropriate stand-off hardware for connecting front panel than usual. Putting everything together is a ceramic 104 power cap like C5, C6, C8 | 4 .../PCB/precadsr_Gerbers/precadsr-F_Mask.gbr | 481 .../precadsr-panel/precadsr-panel.kicad_sch | 831 Hardware/Panel/precadsr-panel/sym-lib-table | 2 | 1N5817 | Schottky Barrier Rectifier Diode, DO-41 D3, D4, D5, D8, D9, D10 Standard switching diode, DO-35 | | | | | C1 | 1 | Conn_01x10 | Pin socket, 2.54 mm, 1x10 | | C4, C5 | 3 | 10uF | Electrolytic capacitor | | | | S1 | 1 | Conn_01x07 | *(optional) SIP socket, 2.54 mm, 1x7 Pin socket, 2.54 mm, 1x2 (see [build notes](build.md)) | | Tayda | A-111 | | | | | | Tayda | A-159 | | | C6, C7, C8, C9 | 4 | | R21, R22, R23 | 3 | 4.7k | Resistor | | | | | S3 | 1 | LM358 | Low-Power, Dual Operational Amplifiers, DIP-8/SOIC-8/TO-99-8"/>