synth_tools

Back

Pitch=11.44mm, , length*width=24.64*15.5mm^2, Pulse, KM-4, http://datasheet.octopart.com/PE-92112KNL-Pulse-datasheet-17853305.pdf L_Toroid Vertical series Radial pin pitch 35mm length 30mm diameter 8mm Inductor, Axial series, Axial, Horizontal, pin pitch=15.24mm, 1.5W, length*diameter=14.3*5.7mm^2 Resistor Axial_DIN0614 series Axial Horizontal pin pitch 35mm length 29mm width 11.9mm Capacitor C, Rect series, Radial, pin pitch=10.00mm, , diameter=14.2mm, Neosid, SD14, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_Sd14.pdf Inductor Radial series Radial pin pitch 12.7mm length 5.2mm diameter 2.7mm Diode, DO-41_SOD81 series, Axial, Vertical, pin pitch=10.16mm, , length*diameter=7*3.3mm^2, Fastron, MICC, http://www.fastrongroup.com/image-show/70/MICC.pdf?type=Complete-DataSheet&productType=series Inductor Axial series Axial Vertical pin pitch 7.62mm length 14.5mm diameter 5.8mm Fastron HBCC Inductor, Axial series, Axial, Horizontal, pin pitch=20.32mm, , length*diameter=17.5*12mm^2, Vishay, IM-10-46, http://www.vishay.com/docs/34030/im10.pdf Inductor Axial series Axial Vertical pin pitch 15.00mm length 16.5mm width 7.3mm Capacitor C, Rect series, Radial, pin pitch=35.81mm, , diameter=50.8mm, Vishay, IHB-6, http://www.vishay.com/docs/34015/ihb.pdf Inductor Radial series Radial pin pitch 5.08mm size 55.9x10.6mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00020 pitch 5mm size 12.3x14mm^2 drill 1.15mm pad 3mm single screw terminal block RND 205-00030, 9 pins, pitch 10mm, size 25.8x8.2mm^2, drill diamater 1.3mm, pad diameter 2mm, size source Multi-Contact FLEXI-E 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, * Knurl polyhedron width, * Knurl polyhedron depth, * Cylinder ends smoothed height, * Knurled surface smoothing amount ); } module rail(height) { difference() { union() { z_position = height - v_margin - title_font_size*2; saw_out = [output_column, bottom_row, 0]; pwm_pot = [input_column + h_margin/2, bottom_row, 0]; pwm_duty = [width_mm - h_margin - working_width/8, row_2, 0]; square_out = [output_column, bottom_row, 0]; pwm_pot = [input_column - h_margin/2, bottom_row, 0]; pwm_pot = [input_column + h_margin/2, row_1, 0]; square_out = [third_col, third_row, 0]; //Fourth row interface placement sync_in = [first_col, third_row, 0]; saw_out = [output_column, row_1, 0]; audio_out_2 = [right_col, row_5, 0]; cv_in_2a = [left_col, row_1, 0]; triangle_out = [output_column, row_2, 0]; audio_in_2 = [left_col, row_6, 0.

New Pull Request

Labels Milestones