Labels Milestones
BackAVX-L (1608-10 Metric), IPC_7351 nominal, (Body size source: https://www.vishay.com/docs/20019/rcwe.pdf), generated with kicad-footprint-generator Soldered wire connection, for 6 times 1 mm² wires, basic insulation, conductor diameter 0.9mm, length 10.0mm, width 3.5mm, e.g. Ettinger 13.13.865, https://katalog.ettinger.de/#p=434 solder Pin_ with flat fork, hole diameter 0.7mm THT pad as test Point, diameter 4.0mm Plated Hole as test point, loop diameter2.6mm, hole diameter 1.0mm low profile wire loop as test Point, square 4.0mm side length, hole diameter 1.0mm (press fit), length 10.0mm solder Pin_ diameter 1.0mm, hole diameter 2.8mm SMD rectangular pad as test Point, diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311711_RT137xxHBWC_OFF-022811Q.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-8-5.08 pitch 5.08mm size 61x10.6mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00066, 45Degree (cable under 45degree), 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 9.0mm, 2 pins diameter 3.0mm z-position of LED center 6.0mm, 2 pins diameter 5.0mm z-position of LED center 3.0mm, 3 pins, pitch 5mm, size 10x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-3-2-5.08, 2 pins, diameter 5.0mm z-position of LED center 2.0mm, 2 pins, pitch 5mm, size 45x12.6mm^2, drill diamater 1.1mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00060 45Degree pitch.
New Pull Request