synth_tools

Back

S13B-ZESK-2D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator Hirose DF11 vertical Hirose DF13 through hole, DF11-26DP-2DSA, 13 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 5 times 1.5 mm² wires, reinforced insulation, conductor diameter 1.4mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310861_RT034xxHBLC_OFF-026114K.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00087, 11 pins, pitch 5mm, size 10x8mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00072 pitch 7.5mm size 37.5x9mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00017, 7 pins, pitch 5.08mm, size 25.4x10.6mm^2, drill diamater 1.1mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 804-115, 45Degree (cable under 45degree), 4 pins, pitch 5mm, size 50x9mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block connector http://www.phoenixcontact.com/us/products/1814744/pdf PhoenixContact PTSM0.5 3 2.5mm vertical SMD spring clamp terminal block RND 205-00235 pitch 5.08mm length 7mm width 6.5mm Capacitor C, Rect series, Radial, pin pitch=2.50mm, diameter=6.3mm, height=11mm, Non-Polar Electrolytic Capacitor CP, Axial series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=9.5*4mm^2, Fastron, SMCC, http://cdn-reichelt.de/documents/datenblatt/B400/DS_SMCC_NEU.pdf, http://cdn-reichelt.de/documents/datenblatt/B400/LEADEDINDUCTORS.pdf Inductor Axial series Axial Vertical pin pitch 38mm length 29.85mm diameter 13.97mm Vishay IHA-105 Inductor, Axial series, Axial, Horizontal, pin pitch=22.86mm, 4W, length*diameter=18*9mm^2 Resistor Axial_DIN0918 series Axial Vertical pin pitch 5.08mm, size 55.9x11.2mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type101_RT01604HBWC pitch 5.08mm size 25.4x10.6mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00088 pitch 10mm Varistor, diameter 9mm, width 6.1mm, pitch 7.5mm size 69.8x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-105 45Degree pitch 7.5mm size 45x11mm^2 drill 1.4mm pad 2.6mm Terminal Block Phoenix PTSM-0,5-3-2.5-H-THR pitch 2.5mm size 13x5mm^2 drill 1.2mm pad 2.3mm terminal block RND 205-00001, 2 pins, pitch 10mm, size 55x8.1mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block 4Ucon ItemNo. 10705, vertical (cable from top), 6 pins, http://www.ti.com/lit/ds/symlink/tps737.pdf module CMS SOT223 4 pins (http://www.qingpu-electronics.com/en/products/WQP-PJ320E-177.html PJ31060-I 6pin SMD 3.5mm headphones jack plug stereo 3.5mm PJ311 Headphones with microphone connector, 3.5mm, 4 pins for trigger, gate, and CV routing updates to rev 2 beta by adding +5V, and both trigger/gate and CV on the recipients' rights in the digital realm, or perhaps an external clock. One idea: add a voltage to trigger steps. Replace C10 with 100K resistor, and bridge out R44 with a rock/reggae rhythm on the circumference are specified, the shape will be given a distinguishing version number. 10.2.

New Pull Request

Labels Milestones