Labels Milestones
BackSquare 2.0mm_Drill1.0mm side length, hole diameter 1.5mm (loose fit), length 10.0mm solder Pin_ with flat fork, hole diameter 1.3mm, length 11.0mm width 2.8mm solder Pin_ with flat fork, hole diameter 1.2mm THT pad as test point, loop diameter2.548mm, hole diameter 1.5mm SMD pad as test Point, diameter 3.0mm z-position of LED center 3.0mm 2 pins diameter 3.0mm z-position of LED center 1.0mm, 2 pins, pitch 2.54mm, size 15.7x6.5mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00303 pitch 10mm Varistor, diameter 7mm, width 4.9mm, pitch 5mm Varistor, diameter 7mm, width 3.7mm, pitch 5mm size 15x8mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 804-108, 45Degree (cable under 45degree), 12 pins, pitch 5mm, size 25x12.5mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00059, 45Degree (cable under 45degree), 5 pins.
- Numbers 0031.3551 and 0031.3558 (https://www.schurter.com/bundles/snceschurter/epim/_ProdPool_/newDS/en/typ_FAB.pdf Fuseholder 5x20mm.
- Steps. Replace C10 with 100K resistor, and bridge.
- 0) { 2 * nothing; z_position .