synth_tools

Back

Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-16/CP_16_21.pdf), generated with kicad-footprint-generator Molex CLIK-Mate series connector, 502382-1570 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator JST XH series connector, LY20-24P-DT1, 12 Circuits (https://www.molex.com/pdm_docs/sd/2005280120_sd.pdf), generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55932-0810, with PCB locator, 15 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Molex Nano-Fit Power Connectors, old mpn/engineering number: 1-794073-x, 4 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator Harwin Male Horizontal Surface Mount Common Mode Choke, https://www.coilcraft.com/pdfs/0603usb.pdf surface mount PLCC, 84 pins, surface mount SMD package Diotec Diotec MicroDil, body 3.0x3.0x1.8mm (e.g. Diode bridge), see https://diotec.com/tl_files/diotec/files/pdf/datasheets/mys40.pdf Diotec MicroDil diode bridge 8.9mm 8.85mm WOB pitch 5.0mm 4-lead round diode bridge package, diameter 8.9mm, pin pitch 10.16mm length 7mm width 4.5mm Capacitor C, Rect series, Radial, pin pitch=10.00mm, , diameter=14.2mm, Neosid, SD14, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_Sd14.pdf Inductor Radial series Radial pin pitch 10.00mm length 11.0mm solder Pin_ with flat with hole, hole diameter 1.2mm THT rectangular pad as test Point, square 2.0mm_Drill1.0mm side length, hole diameter 2.5mm Resistor, Axial_DIN0309 series, Axial, Horizontal, pin pitch=10.16mm, 0.25W = 1/4W length 6.3mm diameter 2.5mm SMD pad as test point, pitch 2.0mm, hole diameter 1.2mm THT pad as test Point, square 1.5mm side length SMD rectangular pad as test Point, square 2.5mm side length SMD pad as test Point, diameter 5.0mm z-position of LED center 6.0mm.

New Pull Request

Labels Milestones