Labels Milestones
BackOutput mode (sw12) // 1 for once/cont (sw15 // pause (j18/j19 // run/stop (sw14 h_wall(h=4, l=slider_spacing*10-1, th=1); v_wall(h=4, l=height-rail_clearance*2-thickness, th=thickness*1.25); v_wall(h=4, l=height-rail_clearance*2, th=right_rib_thickness); // top stuff // step rotary switch? Special: this needs measuring, and leaving space for everything, lining things up more c5efc87d8e Make slider and LED footprints match current OpenSCAD model .gitignore | 1 | Conn_01x10 | Pin socket, 2.54 mm, 1x2 (see [build notes](build.md)) | | R109, R111, R113 | 3 | 2_pin_Molex_connector | 2 | 1nF | Unpolarized capacitor | | | Tayda | A-1157 or A-2425 | | Tayda | A-826 | | Tayda | A-826 | | | Knobs | | | | | R8, R10, R12 | 3 | 10k | Resistor | | R21, R22, R23 | 3 | AudioJack2 | Audio Jack, 2 Poles (Mono / TS) | | J2 | 1 Hardware/lib/aoKicad | 1 | Synth_power_2x5 | 2x5 pin shrouded header 2.54 mm spacing 3 pin Molex header 2.54 mm spacing | | | R25, R27, R29 | 3 | 2N3904 | 0.2A Ic, 40V Vce, Small Signal NPN Transistor, TO-92