Labels Milestones
BackGroundplane updated C5 footprint & tracing; schematic annotation update with full threaded nose and fishtail PCB pins, https://www.neutrik.com/en/product/nmj4hfd2 M Series, 6.35mm (1/4in) stereo jack, switched, fully threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj6hf-1 Slim Jacks, 6.35mm (1/4in) stereo jack, horizontal PCB mount, https://www.neutrik.com/en/product/nc3faav2 AA Series, 3 pole female XLR receptacle, grounding: mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3fah A Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc5fbv A Series, 5 pole male XLR receptacle, grounding: mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3faav2 AA Series, 3 pole XLR female receptacle with 6.35mm (1/4in) mono jack (T/S), https://www.neutrik.com/en/product/nj2fd-v 6.35mm (1/4 in) Vertical Jack, 2 Poles (Mono / TS) | | L1 | 1 | B10k | **Potentiometer, 9 mm pots, you're on your own! * The first two groups should be 1. // @todo Calculate the convexity values based on the thru-holes. - Move any UX connections on the footprint. Some options: Bourns PTL series, such as: https://www.mouser.com/ProductDetail/Bourns/PTL30-15O0-105A2?qs=fV9UsjselOEqdQiKFAm%2Fog%3D%3D (A1M, orange LED, 30mm travel, 15mm shaft * https://www.mouser.com/ProductDetail/Bourns/PTL30-15R0-103B1?qs=X8nz4ozed5glbMOCRmYKzw%3D%3D (B10K, red LED, 30mm travel, 15mm shaft * TBD, needs testing * State Gates (from Befaco) TBD, needs testing * State Gates (from Befaco) TBD, needs testing * State Gates (from Befaco) TBD, needs testing * State Gates (from Befaco * TBD, needs testing; but if LEDs are possible, this should be 10 nF. Documentation ## Mechanical assembly.
New Pull Request