synth_tools

Back

V36 VBGA BGA-48 - pitch 0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf 0.8 mm Highspeed card edge connector for 1.6mm PCB's with 70 contacts (not polarized Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins, weld tabs, board locks (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf 0.8 mm Highspeed card edge connector for 2.4mm PCB's with 08 contacts (polarized Highspeed card edge connector for 2.4mm PCB's with 30 contacts (not polarized Highspeed card edge connector for PCB's with 30 contacts (not polarized Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf 0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf 0.8 mm Highspeed card edge connector for PCB's with 70 contacts (not polarized Highspeed card edge connector for 2.4mm PCB's with 08 contacts (polarized Highspeed card edge connector for PCB's with 08 contacts (not polarized Highspeed card edge connector for 1.6mm PCB's with 50 contacts (polarized Highspeed card edge connector for 2.4mm PCB's with 70 contacts (polarized Highspeed card edge connector for PCB's with 70 contacts (polarized Highspeed card edge connector for panel, 90° PCB mount 4 pin, 2.0mm square SMD pads Net tie, 2 pin, 1.0mm round THT pads Net tie, 4 pin, 2.0mm square SMD pads Net tie, 3 pin, 2.0mm square SMD pads Net tie, 4 pin, 1.0mm round THT pads Net tie, 4 pin, 0.5mm square SMD pads Net tie, 2 pin, 2.0mm square SMD pads Net tie, 4 pin, 0.3mm round THT pads Net tie, 3 pin, 0.5mm square SMD rectangular pad as test point, pitch 3.81mm, size 18.9x7.3mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT single screw terminal block Metz Connect Type171_RT13704HBWC pitch 7.5mm size 15x10.3mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00297, 12 pins, pitch 3.5mm, size 31.5x7.6mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-324, 45Degree (cable under 45degree), 5 pins, pitch 7.5mm, size 44x15mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated.

New Pull Request

Labels Milestones