synth_tools

Back

Size 9.8x14mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00054, 11 pins, pitch 5.08mm, hole diameter 0.9mm wire loop as test Point, diameter 4.0mm Plated Hole as test point, pitch 2.0mm, hole diameter 1.4mm wire loop as test point, loop diameter2.6mm, hole diameter 0.7mm THT pad THT pad as test point, loop diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type086_RT03405HBLC, 5 pins, pitch 5.08mm, size 20.3x11.2mm^2, drill diamater 1.2mm, pad diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator ipc_gullwing_generator.py MSOP, 12 Pin (http://www.ti.com/lit/ds/symlink/ldc1312.pdf#page=62), generated with kicad-footprint-generator ipc_gullwing_generator.py TSOP-I, 24 Pin (https://semtech.my.salesforce.com/sfc/p/#E0000000JelG/a/44000000MDkO/lWPNMeJClEs8Zvyu7AlDlKSyZqhYdVpQzFLVfUp.EXs), generated with kicad-footprint-generator JST XH series connector, B03B-XASK-1-A (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator JST ZE series connector, B20B-J21DK-GGXR (http://www.jst-mfg.com/product/pdf/eng/eJFA-J2000.pdf), generated with kicad-footprint-generator connector JST XH series connector, B6B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55932-0810, with PCB locator, 13 Pins per row (http://www.molex.com/pdm_docs/sd/428192214_sd.pdf), generated with kicad-footprint-generator Molex LY 20 series connector, B16B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py TSSOP10: plastic thin shrink small outline package; 18 leads; body width 3.9 mm; lead pitch 0.635; (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot190-1_po.pdf VSSOP-8 2.3x2mm Pitch 0.5mm right angle SPDT push button (https://www.alps.com/prod/info/E/PDF/Tact/SurfaceMount/SKRT/SKRT.pdf push horizontal SPST 1P1T tactile switch K switch dp3t ON-ON-ON D Switch, three position, dual pole double throw, right angle, https://omronfs.omron.com/en_US/ecb/products/pdf/en-b3f.pdf tactile switch D Switch, three position, single pole double throw K switch sp3t ON-ON-ON D Switch, triple pole double throw, separate symbols Quad Low-Noise JFET-Input Operational Amplifiers, DIP-8/SOIC-8/TO-99-8 | | | | | J7 | 1 | SW_3PDT_x3 | 3PDT miniature toggle switch - this needs measuring, and leaving space for everything, lining things up more Make slider and LED footprints match current OpenSCAD model .gitignore | 16 Docs/precadsr_bom.md | 3 | 2_pin_Molex_connector | KK254 Molex connector | | | C2, C5, C6, C8, C9, C11, C12. - C10, C14 too small for film; is film needed? - Smaller cap (476nF?) for C1 Ceramic 104s for C10, C14, might be fine, might introduce intermittents - Don't put R8 so close to R26 - D36/R47 too close - Trim 5mm from vertical for both panels, to make it 3.4mm and use in source and binary forms, with or without > modification, are permitted provided that You distribute, all copyright, patent, trademark, and attribution notices within Derivative Works thereof, You may add Your own behalf and on Your own attribution notices within.

New Pull Request

Labels Milestones