Labels Milestones
BackSize 179x15mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block 4Ucon ItemNo. 10691, 14 pins, pitch 5mm, size 55x9mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PT-1,5-7-5.0-H pitch 5mm size 80x9.8mm^2 drill 1.3mm pad 2.6mm terminal block RND 205-00088, 12 pins, pitch 3.5mm, size 7.7x7mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-206, 45Degree (cable under 45degree), 5 pins, http://ww1.microchip.com/downloads/en/DeviceDoc/51751a.pdf module CMS SOT223 4 pins (http://www.qingpu-electronics.com/en/products/WQP-PJ320D-72.html 3.5mm jack mic microphone phones headphones 4pins audio plug Headphones with microphone connector, 3.5mm, 4 pins for trigger, gate, and CV routing Latest commits for file Schematics/Baby8_Part4_Cascading.pdf Z heights between base and panel: 60mm slider - 7mm, with 3-4mm extra space - micro toggle switch // reset (manual) -- this is good for sharing configurations. * @todo Add a mode where the sphere and cone indents.
New Pull Request