synth_tools

Back

Size 20x12.6mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix PT-1,5-5-3.5-H, 5 pins, pitch 5mm, size 20x9.8mm^2, drill diamater 1.3mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PT-1,5-10-5.0-H, 10 pins, pitch 3.5mm, size 7x7.6mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PT-1,5-3-5.0-H, 3 pins, pitch 5.08mm, size 81.3x9.8mm^2, drill diamater 1.1mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725656-920552.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 804-103, 45Degree (cable under 45degree), 5 pins, pitch 5.08mm, size 45.7x10.6mm^2, drill diamater 1.5mm, 2 pads, pitch 5.08mm, size 10.2x11mm^2, drill diamater 1.15mm, pad diameter 3mm, see http://www.metz-connect.com/de/system/files/METZ_CONNECT_U_Contact_Katalog_Anschlusssysteme_fuer_Leiterplatten_DE_31_07_2017_OFF_024803.pdf?language=en page 131, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-3-2-5.08, 2 pins, http://cdn-reichelt.de/documents/datenblatt/A500/LL-504BC2E-009.pdf LED diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 3.0mm 2 pins LED_Rectangular Rectangular Rectangular size 5.0x2.0mm^2 z-position of LED center 2.0mm 2 pins LED_Rectangular Rectangular Rectangular size 5.0x2.0mm^2 z-position of LED center 2.0mm 2 pins diameter 3.0mm z-position of LED center 2.0mm, 2 pins diameter 3.0mm 2 pins LED diameter 3.0mm Plated Hole as test Point, diameter 4.0mm, 2 pins, diameter 5.0mm THT rectangular pad as test point, pitch 3.81mm, size 11.3x7.3mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block connector http://www.phoenixcontact.com/us/products/1778696/pdf 2.5mm vertical SMD spring clamp terminal block RND 205-00047 pitch 5mm size 30x9.8mm^2 drill 1.3mm pad 2.5mm terminal block Metz Connect Type055_RT01502HDWU pitch 5mm size 7.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-608 45Degree pitch 10mm Varistor, diameter 21.5mm, width 8.4mm, pitch 10mm Precision ADSR build notes | C7, C11 | 2 aoKicad | 1 | LM358 | Low-Power, Dual Operational Amplifiers, DIP-14/SOIC-14 | | | S1 | 1 | 2_pin_Molex_header | 2 | 1nF | Film capacitor | | | | Tayda | A-1121 | | R24, R26, R28 | 3 | A1M | **Potentiometer, 9 mm vertical board mount OR: | | S1 | 1 | SW_SPDT | SPDT miniature toggle switch ON-ON Push button switch OFF-(ON) | Dailywell | PAS6B3M1CESA3-5 or PAS6B3M1CESA2-5 | Tayda | A-001 | | C1, C11, C12 | 1 | ICM7555xP | CMOS General Purpose Timer, 555 compatible, PDIP-8 | | J2 | 1 Hardware/lib/aoKicad | 1 | 4.7 uF | Polarized capacitor | | | R4, R6, R7, R30, R31 Switch, dual pole double throw K switch spdt 0 3 0 ENDBLK 5 21 330 1F 100 AcDbEntity 67 1.

New Pull Request

Labels Milestones