synth_tools

Back

21.5x15mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block Phoenix PT-1,5-2-3.5-H, 2 pins, pitch 5mm, size 15x12.5mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310551_RT015xxHDWU_OFF-022723S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PT-1,5-7-5.0-H pitch 5mm size 20x10.5mm^2 drill 1.4mm pad 2.6mm Terminal Block 4Ucon ItemNo. 10688 pitch 3.5mm size 14x6.5mm^2 drill 1.2mm pad 3mm Terminal Block WAGO 236-204, 45Degree (cable under 45degree), 48 pins, pitch 7.5mm, size 54.8x14mm^2, drill diamater 1.15mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00047 pitch 5mm size 30x10mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00087 vertical pitch 5mm Varistor, diameter 7mm, width 4.5mm, pitch 7.5mm Varistor, diameter 9mm, width 4.5mm, pitch 5mm size 10x10.5mm^2 drill 1.4mm pad 2.6mm Terminal Block WAGO 236-605, 45Degree (cable under 45degree), 2 pins, pitch 5mm, size 30x12.5mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-412, 45Degree (cable under 45degree), 9 pins, pitch 10mm, size 15x10.3mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00300 pitch 10mm size 122x14mm^2 drill 1.15mm pad 3mm Terminal Block 4Ucon ItemNo. 10698 vertical pitch 5mm size 10x10.2mm^2 drill 1.2mm pad 2.4mm Terminal Block WAGO 236-603, 45Degree (cable under 45degree), 6 pins, http://www.ti.com/lit/ds/symlink/tps737.pdf module CMS SOT223 6 pins, pitch 7.5mm, size 47.3x14mm^2, drill diamater 1.3mm, pad diameter 2.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-117-02-xxx-DV-LC, 17 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator Molex KK 396 Interconnect System, old/engineering part number: A-41792-0011 example for new mpn: 39-30-0160, 8 Pins (http://www.molex.com/pdm_docs/sd/5024300820_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for a pot, an LED, and a tl072 arpeggiator needs a _big_ knob, these are actually 2p6t, which means only six different step counts are available until the replacement arrives - Wiring SW15 (once/stop) and cascade out is easier done via skywiring; only one cross-board wire that shouldn't be so hard. - In general, try to avoid putting any UX connections on the rails v_wall(h=4, l=height-rail_clearance*2-thickness, th=thickness*1.25); v_wall(h=4, l=height-rail_clearance*2, th=right_rib_thickness); //outline of whole PCB? // cube([137.5, 97, 1], center=true); echo("Putting a hole.

New Pull Request

Labels Milestones