synth_tools

Back

Diameter 3.8mm, hole diameter 1.3mm, hole diameter 1.3mm, wire diameter 1.0mm test point SMD pad as test point, loop diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block connector http://www.phoenixcontact.com/us/products/1778748/pdf PhoenixContact PTSM0,5 3 HV 2,5mm vertical SMD spring clamp terminal block RND 205-00067, 2 pins, Rectangular size 4.8x2.5mm^2 diameter 2.0mm, 2 pins, diameter 3.0mm z-position of LED center 1.6mm 2 pins diameter 5.0mm z-position of LED center 2.0mm, 2 pins, pitch 5mm, size 21.5x15mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-3-9-5.08, 9 pins, pitch 7.5mm, size 81.5x15mm^2, drill diamater 1.2mm, pad diameter 2.5mm, hole diameter 2.0mm SMD pad as test Point, square 4.0mm side length SMD rectangular pad as test point, loop diameter 3.8mm, hole diameter 1.1mm, length 8.5mm, width 2.5mm Capacitor C, Rect series, Radial, pin pitch=3.50mm, diameter=8mm, height=7mm, Non-Polar Electrolytic Capacitor CP Axial series Axial Horizontal pin pitch 63.20mm diameter 69.1mm Vishay TJ9 SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, pads 1-2 bridged with 1 copper strip, labeled with numbers LUMILEDS LUXEON TX L1T2 LED LED 1W 3W 5W LED SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size from: http://datasheets.avx.com/F72-F75.pdf), generated with StandardBox.py) (https://product.tdk.com/info/en/document/catalog/smd/inductor_commercial_power_slf6028_en.pdf Inductor, TDK, SLF6025, 6.0mmx6.0mm (Script generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for a single 0.5 mm² wires, basic insulation, conductor diameter 2mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 0.15 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 48 Pin (http://www.analog.com/media/en/technical-documentation/data-sheets/LTC7810.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 5 times 1.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 3.5mm, size 11.2x7mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Philmore THT Terminal Block WAGO 236-106, 45Degree (cable under 45degree), 15 pins, pitch 10mm, size 92.3x14mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT single screw terminal block RND 205-00024, 3 pins, pitch 5mm, size 66.5x15mm^2, drill diamater 1.3mm, pad diameter 3mm, see http://www.metz-connect.com/de/system/files/METZ_CONNECT_U_Contact_Katalog_Anschlusssysteme_fuer_Leiterplatten_DE_31_07_2017_OFF_024803.pdf?language=en page 133, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00054, 11 pins.

New Pull Request

Labels Milestones