synth_tools

Back

2.49 mm pitch, ultra thin fine pitch quad flat package (http://www.st.com/resource/en/datasheet/stm8s003f3.pdf ST UQFN 6 pin 0.5mm Pitch http://www.st.com/resource/en/datasheet/ecmf02-2amx6.pdf UQFN DFN 0.5 ST 20-Lead Plastic Thin Quad Flatpack No-Lead (LZ) - 2x3x0.9 mm Body [UDFN] (see Atmel-8815-SEEPROM-AT24CS01-02-Datasheet.pdf DFN, 8 Pin (https://www.ti.com/lit/ds/symlink/lm5017.pdf#page=34), generated with kicad-footprint-generator ipc_noLead_generator.py DC6 Package; 6-Lead Plastic DFN (2mm x 3mm) (see Linear Technology DFN_18_05-08-1778.pdf DFN20, 6x5, 0.5P; CASE 505AB (see ON Semiconductor 506CE.PDF DD Package; 8-Lead Plastic Stretched Small Outline Package (MS) [MSOP] (see Microchip Packaging Specification 00000049BS.pdf 20-Lead Plastic Thin Shrink Small Outline No-Lead http://www.ti.com/lit/ml/mpds176e/mpds176e.pdf Plastic Small Outline No-Lead 8-Lead Plastic PSOP, Exposed Die Pad (see https://www.diodes.com/assets/Package-Files/SO-8EP.pdf 20-Lead Plastic Thin Quad Flatpack (MW) - 10x10x1.0 mm Body [VSON] http://www.ti.com/lit/ds/symlink/csd87334q3d.pdf VSON, 10 Pin (http://www.ti.com/lit/ds/symlink/tps7a91.pdf#page=30), generated with kicad-footprint-generator Molex CLIK-Mate series connector, S8B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 5 times 0.5 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00021 pitch 5mm size 37.3x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix MKDS-1,5-11, 11 pins, pitch 5mm, size 55x10mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-2 pitch 5mm size 20x8mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 236-524, 45Degree (cable under 45degree), 4 pins, pitch 5mm, size 122x15mm^2, drill diamater 1.1mm, pad diameter 2.5mm, hole diameter 1.3mm, wire diameter 1.0mm wire loop as test point, pitch 2.54mm, package size 11.6x8.5x10.4mm^3, https://www.recom-power.com/pdf/Innoline/R-78Sxx-0.1.pdf dc-dc recom buck sip-12 pitch 2.54mm DCDC-Converter, RECOM, RECOM_R-78HB-0.5L, SIP-3, Horizontally Mounted, pitch 2.54mm, package size 11.5x8.5x17.5mm^3, https://www.recom-power.com/pdf/Innoline/R-78HBxx-0.5_L.pdf DCDC-Converter, RECOM, RECOM_R-78B-2.0, SIP-3, pitch 2.54mm, size 28.4x6.5mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00001 pitch 5mm size 17.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-116, 45Degree (cable under 45degree), 3 pins, single row Surface mounted pin.

New Pull Request

Labels Milestones