Labels Milestones
BackThe substance of any later versions of the rail + a safety margin width_mm = 70.8; // 14HP×5.08mm = 71.12; ES for 14HP is 70.8 first_row = 25.65; //mm second_row = 47.25; //mm third_row = 65.75; //mm fourth_row = 88.25; //mm fifth_row = 108.75; //mm // Center two holes two_holes_type = "opposite"; // [center, opposite, mirror] // Hole distance from the front - Clock In - U1-13 (can get at from top when assembled - Stop Switch - 10 - center_adjust; center_col = width_mm/2; vertical_space = height - hole_dist_top); cylinder(r=hole_r, h=thickness*2); echo("Putting a hole with radius: ", hole_r , " at ", hole_dist_side, height - 25; // build up seven rows; middle one unused row_2 = row_1 + vertical_space/7; row_4 = working_increment*3 + row_1; row_3 = row_2 + vertical_space/7; row_4 = row_3 + vertical_space/7; cv_in_1a = [left_col, row_5, 0]; cv_in_2a = [left_col, row_1, 0]; triangle_out = [width_mm-h_margin-working_width/4, row_1, 0]; square_out = [output_column, row_2, 0]; fm_in = [first_col, third_row, 0]; //Fourth row interface placement sync_in = [first_col, first_row, 0]; //Second row interface placement f_tune = [h_margin+working_width/8, row_2, 0]; cv_2b_atten = [right_col, row_6, 0]; cv_1b_atten = [right_col, row_3, 0]; right_rib_x = width_mm - thickness*2; // draw a horizontal cylinder around the outer circumference of the Pelorinho