3
1
Back

| Synth_power_2x5 | Pin header 2.54 mm spacing D Switch, dual pole double throw K switch dual double-pole single-throw OFF-ON D Single Pole Single Throw (SPST) switch D reed switch, default-closed D SPDT reed switch K switch dual-pole double-throw spdt ON-ON horizontal MEC 5G single pole double throw, illuminated paddle, http://www.nkkswitches.com/pdf/gwillum.pdf switch single-pole double-throw spdt ON-ON D Push button switch, generic, symbol, four pins D Push button switch, normally open, two pins, 45° tilted D Momentary Switch, dual pole double throw, illuminated paddle, red and green LEDs K switch normally-open pushbutton push-button D Push button switch, generic, two pins D Push button switch, normally open, two pins, 45° tilted D Momentary Switch, dual pole double throw, illuminated paddle, http://www.nkkswitches.com/pdf/gwillum.pdf switch single-pole double-throw spdt ON-ON illuminated red green D Push button switch, generic, two pins Switch, single pole double throw | | | C12 | 3 | A1M | \*\*Potentiometer, 16 mm vertical board mount | | R30 | 1 | B10k | Potentiometer | | | | Tayda | A-001 | | Tayda | A-1121 | | | | | R15, R20, R22 | 3 pin Molex header 2.54 mm spacing KK254 Molex connector 2 pin Molex header 2.54 mm spacing | Tayda | A-3486 or A-3487\*\*\* | | | Tayda | A-826 | | R20, R22 | 3 | 2_pin_Molex_header | 2 | 1nF | Unpolarized capacitor | | J2 | 1 | SW_SPDT | SPDT miniature toggle switch - number of pins: 07; pin pitch: 3.81mm; Angled || order number: 1766822 12A 630V Generic Phoenix Contact connector footprint for: MC_1,5/4-GF-5.08; number of pins: 02; pin pitch: 7.62mm; Vertical; threaded flange || order number: 1776692 12A || order number: 1843855 8A 160V Generic Phoenix Contact connector footprint for: MCV_1,5/5-G-3.81; number of pins: 06; pin pitch: 3.50mm; Angled; threaded flange || order number: 1827965 8A 160V Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/8-G-7,62; number of pins: 10; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1776977 12A .

New Pull Request