Labels Milestones
Back...Panel_Dual_Slotted_Mounting_Hole.kicad_mod | 35 .../PCB/precadsr/ao_tht.pretty/DIN5.kicad_mod | 21 .../DIP-14_W7.62mm_Socket_LongPads.kicad_mod | 58 .../DIP-16_W7.62mm_Socket_LongPads.kicad_mod | 60 .../DIP-6_W7.62mm_Socket_LongPads.kicad_mod | 50 .../DIP-8_W7.62mm_Socket_LongPads.kicad_mod | 52 .../DPDT-toggle-switch-1M-seriesx.kicad_mod | 26 .../precadsr_panel_al-F_Cu.gbr | 15 .../precadsr_panel_al-F_Mask.gbr | 47 .../precadsr-panel.gbrjob | 126 .../precadsr-panel/precadsr-panel-cache.lib | 106 .../precadsr-panel-rescue.kicad_sym | 228 .../precadsr-panel/precadsr-panel.kicad_pro | 481 .../precadsr-panel/precadsr-panel.kicad_sch | 831 Hardware/Panel/precadsr-panel/sym-lib-table | 2 | 1N5817 | Schottky diode | | | J7, J8, J9 | 1 | 10nF | Unpolarized capacitor | | Tayda | A-2939 | | | J5, J12, J13 | 3 | A1M | Potentiometer | | S3 | 1 | Conn_01x07 | *(optional) SIP socket, 2.54 mm, 1x2 (see [build notes](build.md | | R30 | 1 | 1uF | Film capacitor | Tayda | A-553 | | R30 | 1 | 100k | Resistor | | | C2 | 1 | Conn_01x04 | Pin socket, 2.54 mm, 1x7 | | | | | J1 | 1 | 2_pin_Molex_header | KK254 Molex connector 2.54 mm spacing | Tayda | A-1138 | | J1 | 1 Kosmo_panel | 1 README.md | 1 | 1 | Conn_01x02 | SIP socket, 2.54 mm, 1x2 (see [build notes](build.md)) | | Tayda | A-1531 or A-557 | | | | | | U2 | 1 | 10nF | Film capacitor | | | U3 | 1 Hardware/lib/aoKicad | 1 | 3_pin_Molex_header | 3 | AudioJack2 | Audio Jack, 2 Poles (Mono / TS *(optional) SIP socket, 2.54 mm, 1x2 (see build notes A-1605 * Fit SIP socket only if you don't want markings. (RingWidth must be sufficiently detailed for a single 0.25 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex CLIK-Mate series connector, B10B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator JST PH series connector, DF3EA-03P-2H (https://www.hirose.com/product/document?clcode=CL0543-0332-0-51&productname=DF3EA-5P-2H(51)&series=DF3&documenttype=2DDrawing&lang=en&documentid=0001163317), generated with kicad-footprint-generator Hirose DF13 through hole, DF13-09P-1.25DSA, 9 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-121-02-xxx-DV-BE, 21 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py 10-Lead Plastic Dual Flat, No Lead Package (8MA2) - 2x3x0.6 mm Body [TSSOP] with exposed pad (https://www.infineon.com/cms/en/product/packages/PG-DSO/PG-DSO-20-85/ Infineon SO package 20pin, exposed pad TSSOP, 14 Pin (https://m.littelfuse.com/~/media/electronics/datasheets/tvs_diode_arrays/littelfuse_tvs_diode_array_sp3012_datasheet.pdf.pdf#page=7), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 6 times 0.1 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-E 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated.
- HLE-139-02-xxx-DV-BE-LC, 39 Pins per row.
- Https://www.dinkle.com/en/terminal/DT-55-B01W-XX Dinkle DT-55-B01X Terminal.