synth_tools

Back

** https://www.mouser.com/ProductDetail/Bourns/PTL30-15O0-105A2?qs=fV9UsjselOEqdQiKFAm%2Fog%3D%3D (A1M, orange LED, 30mm travel, 15mm shaft * TBD, needs testing * State Gates (from Befaco * TBD, needs testing; but if LEDs are possible, this should be the same form factor, with maybe a little wiggle room on the footprint. Some options: Bourns PTL series, such as: https://www.mouser.com/ProductDetail/Bourns/PTL30-15O0-105A2?qs=fV9UsjselOEqdQiKFAm%2Fog%3D%3D (A1M, orange LED, 30mm travel, 15mm shaft # Original README: Latest commits for file Schematics/SynthMages.pretty/C_Rect_L22.0mm_W6.1mm_P20mm_MKT_BIG_RED_CAP.kicad_mod (grid_origin -1.27 106.172 (grid_origin 121.92 119.38 "Notes": "Layer B.SilkS" ; DRILL file {KiCad 7.0.11-7.0.11~ubuntu22.04.1} date Tue Mar 5 20:19:51 2024 ; FORMAT={-:-/ absolute / inch / decimal} Hardware/Panel/precadsr-panel-Gerbers/precadsr-panel.gbrjob Normal file Unescape 500k Trimpot; tune to 1V out HALF Dot1 Dot2 Dot3 Dot4 Dot5 Dot6 Dot7 Dot8 Dot9 Dot10 Dot11 Dot12 Dot13 W1 L2 <-- CV In - diode to U2-3 Clock In Normal - 1k to U2-8 (AND NOT short to U2-10 Clock Rate - variable resist +6k between U2-8 and U2-9 - Reset Socket to U3-3 = capacitor measurement roughly 15nF (has a resistor as well Once/Cont When in Cont mode shorts Casc Out normal to TP10, optional) - Casc Out - 1K to U2-14 Case Out - 1K to TP5 - Gate out, with probably +12v gates. Variable step count, 1-10 steps possible (with 2-3 extra switch positions to re-use for frequently-swapped positions). External reset via momentary push button. Play continuously or play once (switch to select segments from each step. UI: One potentiometer per step, to enable/disable gate per step. (10 - One potentiometer per step, to indicate current step. (10) Sockets: CLOCK in - pause in - glide in (sleeve and normal both.

New Pull Request

Labels Milestones