synth_tools

Back

RECOM_R-78S-0.1, SIP-4, pitch 2.54mm, size 15.7x6.5mm^2, drill diamater 1.1mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311751_RT027xxHBLC_OFF-022814U.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block connector http://www.phoenixcontact.com/us/products/1814757/pdf PhoenixContact PTSM0.5 6 2.5mm vertical SMD spring clamp terminal block RND 205-00029, 8 pins, pitch 7.5mm, size 30x11mm^2, drill diamater 1.1mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect 360271, block size 9x7.3mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block WAGO 236-516, 45Degree (cable under 45degree), 2 pins, diameter 3.0mm 2 pins LED, Round, FlatTop, Rectangular size 3.9x1.8mm^2, 2 pins, diameter 3.0mm z-position of LED center 6.0mm 2 pins LED, Round, FlatTop, diameter 3.0mm, 2 pins, pitch 7.5mm, size 30x11mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 804-310 45Degree pitch 7.5mm size 37.5x10.3mm^2 drill 1.3mm pad 2.6mm Terminal Block 4Ucon ItemNo. 19965, 8 pins, pitch 2.5mm, size 9.7x10mm^2, drill diamater 1.15mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00293 pitch 5.08mm length 26mm diameter toroid L_Toroid, Horizontal series, Radial, pin pitch=5.00mm, , diameter=10mm, Electrolytic Capacitor CP, Radial series, Radial, pin pitch=10.00mm, , length*width=11.5*5.2mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 5.08mm 0.25W = 1/4W length 6.3mm diameter 2.5mm SMD pad as test Point, square 1.0mm side length, hole diameter 0.7mm THT pad rectangle square SMD pads Net tie, 4 pin, Right Angle, Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89006xx, 6 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py HTSSOP56: plastic thin shrink small outline package; 10 leads; body width 7.5 mm; (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot369-1_po.pdf SSOP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-16/cp-16-40.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-136-02-xxx-DV, 36 Pins per row, Mounting: PCB Mounting Flange (http://www.molex.com/pdm_docs/sd/039291047_sd.pdf), generated with kicad-footprint-generator Soldered wire connection, for 2 times 2.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block 4Ucon ItemNo. 10686 pitch 3.5mm size 11.2x7mm^2 drill 1.2mm pad 3mm Terminal Block WAGO 236-136 45Degree pitch 7.5mm size 45x10.3mm^2 drill 1.3mm pad 2.5mm terminal block Metz Connect Type101_RT01602HBWC pitch 5.08mm size 45.7x8.45mm^2 drill 1.1mm pad 2.2mm Terminal Block WAGO 236-312 45Degree pitch 7.5mm size 9.8x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-302.

New Pull Request

Labels Milestones