Labels Milestones
BackVertical for both panels, to make fitting inside a case easier. Or 10mm if it can fit; losing the bodge area. Outs: Clock Out - 1K to TP5 Gate Out - 1K to U2-14 Case Out - Diode from rotary pin 13? CV Out - 1K to U2-14 Case Out - Diode from rotary pin 13 - CV out, with probably +12v gates. - Variable step count, 1-10 steps possible (with 2-3 extra switch positions to re-use for frequently-swapped positions). - External reset via momentary push button. - Play continuously or play once (switch to select segments from each step. UI: One potentiometer per step, to enable/disable gate per step. (10 Momentary-normal-off pushbutton to manually reset. - One SPDT switch to adjust CV output range, switch between 5v and 2.5v max (or whatever is configured). - Momentary-normal-off pushbutton to manually reset. LEDs: One per step, to enable/disable gate per step. (10 - One potentiometer per step, to set output voltages. (10 One potentiometer per step, to enable/disable gate per step. (10 One multi-pole rotary switch with 12 positions D 3 pin Molex connector KK254 Molex header 2.54 mm spacing Pin header 2.54 mm spacing 2 pin Molex header 2.54 mm 2x5"/>