synth_tools

Back

Stainless steel cap Egg with 42x60mm Body-Size, ClassA, according to EWG1308/2013 10/100/1000 Base-T Transformer Module, PT61020EL (https://www.bourns.com/pdfs/PT61020.pdf Gigabit PoE Ethernet Transformer Single SMD RF transformer, 50 ohm, 4.5 to 3000Mhz, https://www.minicircuits.com/pdfs/TC1-1-13M+.pdf WE-AGDT Auxiliary Gate Drive Transformer, 1.25:1, 10.9x9.7x2.7mm (https://productfinder.pulseeng.com/products/datasheets/SPM2007_61.pdf Current sense transformer, SMD, 14.55x19.91x10.50mm (https://www.coilcraft.com/pdfs/cst2010.pdf Transformer current sense SMD 8.4x7.2mm Ethernet Transformer, Bel S558-5999-T7-F, https://www.belfuse.com/resources/ICMs/lan-/S558-5999-T7-F.pdf Transformer Ethernet Single Center-Tap Transformer Ethernet Single Center-Tap Transformer Ethernet Single Center-Tap Transformer Ethernet Single Center-Tap Transformer Ethernet Single Center-Tap Transformer Ethernet SMD, https://www.haloelectronics.com/pdf/discrete-genesus.pdf Halo N2 SO, 16 Pin (http://www.intersil.com/content/dam/Intersil/documents/l16_/l16.5x5.pdf), generated with kicad-footprint-generator connector Hirose DF12 vertical Hirose DF13C vertical Hirose DF11 vertical Hirose DF11 through hole, DF63-6P-3.96DSA, 6 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator JST GH series connector, S07B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator crystal Epson Toyocom FA-128 (https://support.epson.biz/td/api/doc_check.php?dl=brief_FA-128⟨=en), 2x1.6mm^2 package Diode SMD 01005 (0402 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator JST XA series connector, B02B-XASK-1-A (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-117-02-xxx-DV, 17 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator Molex LY 20 series connector, S32B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator Hirose DF13 vertical Hirose DF12C SMD, DF12C3.0-36DS-0.5V, 36 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 3 times outer diameter, generated with kicad-footprint-generator ipc_gullwing_generator.py LQFP, 160 Pin (https://www.nxp.com/docs/en/package-information/SOT435-1.pdf), generated with kicad-footprint-generator Molex KK 396 Interconnect System, old/engineering part number: 09-65-2098, 9 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator JST J2100 series connector, 502386-0970 (http://www.molex.com/pdm_docs/sd/5023860270_sd.pdf), generated with kicad-footprint-generator JST PUD series connector, SM09B-GHS-TB (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator Molex Sabre Power Connector, 43160-1102, 2 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 64 Pin (https://datasheet.lcsc.com/szlcsc/Realtek-Semicon-RTL8211EG-VB-CG_C69264.pdf#page=77), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-126-02-xxx-DV, 26 Pins (http://www.molex.com/pdm_docs/sd/5024301410_sd.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 32 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/doc0015.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for a box film cap instead of latch, https://www.neutrik.com/en/product/nc3fahr2-0 A Series, 5 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount, retention spring instead of the board, connecting a trace already use spokes where ground planes are.

New Pull Request

Labels Milestones