synth_tools

Back

Pin (http://intantech.com/files/Intan_RHD2000_series_datasheet.pdf#page=38), generated with kicad-footprint-generator JST XA series connector, DF52-5S-0.8H (https://www.hirose.com/product/en/products/DF52/DF52-3S-0.8H%2821%29/), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for a single 0.15 mm² wires, basic insulation, conductor diameter 0.5mm, outer diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00014, 4 pins, pitch 5mm, size 22.3x14mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00033, 12 pins, pitch 2.54mm, size 20.8x6.2mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00235, 5 pins, pitch 5.08mm, size 76.2x9.8mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PTSM-0,5-7-2.5-H-THR pitch 2.5mm size 19.7x10mm^2 drill 1.2mm pad 3mm Terminal Block Phoenix MKDS-1,5-9-5.08 pitch 5.08mm size 66x11.2mm^2 drill 1.3mm pad 2.6mm Terminal Block 4Ucon ItemNo. 10704 vertical pitch 5mm Varistor, diameter 12mm, width 4.2mm, pitch 5mm size 61.5x15mm^2 drill 1.2mm pad 2.4mm Terminal Block WAGO 236-401 45Degree pitch 5mm size 25x9mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00295, 10 pins, pitch 5mm, size 17.3x14mm^2, drill diamater 1.1mm, pad diameter 2.6mm, see http://www.metz-connect.com/ru/system/files/productfiles/Data_sheet_310941_RT035xxHBLU_OFF-022742T.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PT-1,5-2-3.5-H, 2 pins, pitch 5mm, size 50x9.8mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00082, 6 pins, dual row male, vertical entry, no latches, PN:G125-MVX0605L0X Harwin Gecko Connector, 34 pins, dual row female, vertical entry, strain relief clip Harwin LTek Connector, 22 pins, single row style1 pin1.

New Pull Request

Labels Milestones