Labels Milestones
Back-- biggest by far, maybe 12.6mm? SR2511 series are 11.43? Maybe more? Distance between pcb and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3mafh-ph A Series, 5 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3fbh2 B Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, additional ground contacts, https://www.neutrik.com/en/product/nc3fbh1-e B Series, 5 pole female XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3fav1 A Series, 3 pole female receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel: 9.8mm (alpha pots sliders: 3mm above panel, tight but possible mini toggle: 4mm above panel, tight but possible mini toggle: 4mm above panel, tight but possible mini toggle: ample space above pcb micro toggle: 0mm above panel; could work with printed spacers mini toggle: 4mm above panel, ample thunkicons: probably too tight; could work with printed spacers and existing lead lengths alpha pots: barely enough to attach knob 01bb4964a6 Add CV (and knob) controlled glide to schematic main arrasta/samba_reggae.txt 82 lines REP: repique CAX: caixa MSD: mid surdo (sometimes MS1, MS2, etc, if pattern spans measures or has planned variations) BSD: back surdo (L.
New Pull Request