Labels Milestones
BackExplicitly account for margin at edges width = 36; // [1:1:84] /* [Holes] */ hole_dist_top = 2.5; rail_clearance = 8.5; // mm from very top/bottom edge and where it is safe to put the output jacks triangle_out = [third_col, fourth_row, 0]; triangle_out = [third_col, third_row, 0]; fm_lvl = [second_col, second_row, 0]; //Third row interface placement pwm_in = [input_column + h_margin/2, bottom_row, 0]; pwm_pot = [input_column + h_margin/2, bottom_row, 0]; cv_in = [input_column, row_2, 0]; square_out = [third_col, fifth_row, 0]; pwm_duty = [input_column, bottom_row, 0]; c_tune = [width_mm/2 + h_margin, top_row, 0]; left_rib_x = 0; // [0:No, 1:Yes] TaperAngle=asin(KnobHeight / (sqrt(pow(KnobHeight, 2) pow(KnobMajorRadius-KnobMinorRadius,2)))) - 90; hole_right = hole_left + 78.5; // Step count (sw11 // step rotary switch - this needs measuring, and leaving space for everything.
- POE, Silvertel, pitch 2.54mm.
- Coded switch, J-hook, https://www.nidec-copal-electronics.com/e/catalog/switch/sh-7000.pdf 4-bit rotary coded.
- HLE-125-02-xxx-DV-LC, 25 Pins per row.
- Filmoscope Quentin/Panels schematic start, and some example modules.
- File Images/loop.png d8deca9307 Delete '3D.