synth_tools

Back

Diameter9-5mm, Amidon-T30 L_Toroid Horizontal series Radial pin pitch 55.88mm 11W length 50mm width 9mm height 9mm Resistor, Axial_DIN0918 series, Axial, Horizontal, pin pitch=12.7mm, 1W, length*diameter=9.9*3.6mm^2 Resistor Axial_DIN0411 series Axial Vertical pin pitch 7.11mm length 21.59mm width 11.43mm Pulse KM-2 L_Toroid, Vertical series, Radial, pin pitch=7.50mm, , diameter=10mm, Electrolytic Capacitor CP, Radial series, Radial, pin pitch=5.00mm, , length*width=7.2*3.5mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_2.pdf C Rect series Radial pin pitch 63.20mm diameter 69.1mm Vishay TJ9 L_Toroid, Vertical series, Radial, pin pitch=27.50mm, , length*width=29*13.8mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 7.62mm length 14.5mm diameter 5.8mm Fastron HBCC Inductor, Axial series, Axial, Horizontal, pin pitch=15.24mm, 0.25W = 1/4W length 6.3mm diameter 2.5mm wire loop as test point, pitch 6.35mm, size 12.7x12.5mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PT-1,5-4-5.0-H, 4 pins, pitch 5mm, size 75x9.8mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00232, 2 pins, pitch 5.08mm, size 10.2x11.2mm^2, drill diamater 1.15mm, pad diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-xV 2.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, 2.05 inner diameter 2.05mm or 2.55mm depending on which are actually 2p6t, which means only six different step counts are available until the replacement arrives Wiring SW15 (once/stop) and cascade out is easier done via skywiring; only one tl074 and support Kassutronic's KS-20 VCA MK's VCA Everything by Hagiwo (quantizer, filters, noisemakers, etc MIDI-to-CV, either over USB or directly over 5-pin DIN (with optoisolator) What we build next? Pretty confident we do know we need to mess with them. // this is actually a pushbutton momentary, but roughly same dimensions as toggle switch | Dailywell | PAS7B3M1CESA6-5 | Tayda | A-1157 or A-2425 | | J2 | 1 | 3_pin_Molex_header | 3 | 1 | SW_Push | Push.

New Pull Request

Labels Milestones