synth_tools

Back

FLG1928 FL1930 FLG1930 Artix-7 BGA, 22x22 grid, 19x19mm package, 0.8mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=263, NSMD pad definition (http://www.ti.com/lit/ds/symlink/tlv320aic23b.pdf, http://www.ti.com/lit/wp/ssyz015b/ssyz015b.pdf Texas Instruments, DSBGA, area grid, NSMD, YZP0005 pad definition, https://www.ti.com/lit/ds/symlink/lmg1020.pdf, https://www.ti.com/lit/ml/mxbg078z/mxbg078z.pdf BGA 6 0.4 YFF0006 Texas Instruments, DSBGA, 1.5195x1.5195x0.600mm, 8 ball 3x3 area grid, YZR pad definition Appendix A BGA 1760 1 FF1761 FFG1761 Virtex-7 BGA, 42x42 grid, 42.5x42.5mm package, 1mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug865-Zynq-7000-Pkg-Pinout.pdf#page=95, NSMD pad definition (http://www.ti.com/lit/ds/symlink/tlv320aic23b.pdf, http://www.ti.com/lit/wp/ssyz015b/ssyz015b.pdf Texas Instruments, DSBGA, 1.5195x1.5195x0.600mm, 8 ball 3x3 area grid, YZP, YZP0010, 1.86x1.36mm, 10 Ball, 3x4 Layout, 0.5mm Pitch, https://www.adestotech.com/wp-content/uploads/AT25SL321_112.pdf#page=75 WLCSP 12 1.56x1.56 https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMM150-DS001-01.pdf WLCSP-12, 6x4 raster staggered array, 1.403x1.555mm package, pitch 0.4mm; see section 7.1 of http://www.st.com/resource/en/datasheet/DM00282249.pdf WLCSP-90, 10x9 raster, 4.223x3.969mm package, pitch 0.65mm WLP-4, 2x2 raster, 0.73x0.73mm package, pitch 0.4mm; see section 10.3 of https://www.parallax.com/sites/default/files/downloads/P8X32A-Propeller-Datasheet-v1.4.0_0.pdf QFN, 48 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_48_5.pdf), generated with kicad-footprint-generator connector wire 1sqmm double-strain-relief Soldered wire connection, for 5 times 2.5 mm² wire, reinforced insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-xV 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator ipc_noLead_generator.py 10-Lead Plastic DFN (3mm x 3mm); Pitch 0.4mm; EP 1.7x1.54mm; for InvenSense motion sensors; Mask removed below exposed pad; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU-6050_DataSheet_V3%204.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic Shrink Small Outline (SN) - Narrow, 3.90 mm Body [UQFN]; (see Microchip Packaging Specification 00000049BS.pdf DFN package size 1006 3 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 2.0mm 2 pins diameter 3.0mm z-position of LED center 1.0mm 2 pins black IR-LED, diameter 3.0mm, 3 pins, pitch 5mm, size 50x12.6mm^2, drill diamater 1.15mm, pad diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-602 45Degree pitch 7.5mm size 6.5x15mm^2 drill 1.2mm pad 2.4mm Terminal.

New Pull Request

Labels Milestones